User Tools

Site Tools


eg-connectivity:meetings

This is an old revision of the document!


Meeting Notes for AGL Connectivity Expert Group

Meetings of the Connectivity EG are held every other Thursday at 13:00 UTC.The upcoming schedule can be found below.

Conference Information:

Please join my meeting from your computer, tablet or smartphone. https://global.gotomeeting.com/join/254629557

You can also dial in using your phone.

Access Code: 254-629-557

Australia: +61 2 9091 7603 Austria: +43 7 2088 0716
Belgium: +32 28 08 4372 Canada (Toll Free): 1 877 777 3281
Canada: +1 (647) 497-9380 Denmark: +45 69 91 84 58
Finland: +358 931 58 1773 France: +33 170 950 590
Germany: +49 692 5736 7300 India (Toll Free): 18002669775
Ireland: +353 15 360 756 Italy: +39 0 699 26 68 65
Japan (Toll Free): 0 120 242 200 Korea, Republic of (Toll Free): 0806180880
Netherlands: +31 208 080 759 New Zealand: +64 9 974 9579
Norway: +47 21 04 30 59 Spain: +34 931 76 1534
Sweden: +46 852 500 691 Switzerland: +41 435 0026 89
United Kingdom: +44 20 3713 5011 United States (Toll Free): 1 877 309 2070
United States: +1 (312) 757-3119

Joining from a video-conferencing room or system? Dial: 67.217.95.2##254629557 Cisco devices: 254629557@67.217.95.2

First GoToMeeting? Let's do a quick system check: https://link.gotomeeting.com/system-check ——-

November 15, 2018

Attendees: Walt, Jan-Simon, Scott, Kusakabe, Romain, Michael, Chris

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • 9/6
    • Not much to update
  • 9/20
    • No Update
  • 10/4
    • adapting low-level CAN binder to handle CAN FD frames.
    • Test cases are complete for low level CAN binder and Signal Composer
  • 11/1
    • No update
  • 11/15
    • No update
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
    • 9/6 - Bluetooth binding still in progress
    • 11/1
    • 11/15
      • Matt R's rewrite of Bluetooth binding progressing. Stoyan will test the latest batch of patches merged in gerrit. Then these will be backported to FF.
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
    • 8/23
    • 9/6 - SPEC-1683 resolved.
    • 11/1 had issues in Dresden with service (fixed by https://gerrit.automotivelinux.org/gerrit/#/c/17249/ )
    • 11/15 - Raquel removed libnfc dependency and has a good handle on how to finish it off. Should be ready for Karlsruhe.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3
    • 11/1
    • 11/15
      • Done

New Business:

  • Setting time on the M3 issue
  • Got an update from Scott on the work for the IC reference.

November 1, 2018

Attendees: Jan-Simon, Tom

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • 9/6
    • Not much to update
  • 9/20
    • No Update
  • 10/4
    • adapting low-level CAN binder to handle CAN FD frames.
    • Test cases are complete for low level CAN binder and Signal Composer
  • 11/1
    • No update
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
    • 9/6 - Bluetooth binding still in progress
    • 11/1
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3
    • 11/1

New Business:

October 18, 2018

Canceled due to Dresden AMM

October 4, 2018

Attendees: Walt, Jan-Simon, Romain, Scott, Stephane, Michael

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • 9/6
    • Not much to update
  • 9/20
    • No Update
  • 10/4
    • adapting low-level CAN binder to handle CAN FD frames.
    • Test cases are complete for low level CAN binder and Signal Composer
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
    • 9/6 - Bluetooth binding still in progress
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
    • 8/23
    • 9/6 - SPEC-1683 resolved.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

September 20, 2018

Attendees: Walt, Jan-Simon, Scott

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • 9/6
    • Not much to update
  • 9/20
    • No Update
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
    • 9/6 - Bluetooth binding still in progress
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
    • 8/23
    • 9/6 - SPEC-1683 resolved.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

September 6, 2018

Attendees: Walt, Matt, Sebastien, Romain

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • 9/6
    • Not much to update
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
    • 9/6 - Bluetooth binding still in progress
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
    • 8/23
    • 9/6 - SPEC-1683 resolved.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

September 6, 2018

Attendees: Walt, Matt, Sebastien, Romain

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • 9/6
    • Not much to update
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
    • 9/6 - Bluetooth binding still in progress
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
    • 8/23
    • 9/6 - SPEC-1683 resolved.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

August 23, 2018

Attendees: Walt, Jan-Simon, Romain, Matt, Sebastien

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • 8/23
    • Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.
    • Bug fixes from unit test output will be next task.
    • J1939 investigation and V2C metric collection planned for GG
    • Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
    • Conversion to API V3 in progress for GG
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    • 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 7/12
      • Done. Need icons. Will submit ticket
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
    • 8/23
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

August 9, 2018

Attendees: Walt, Michael, Chris, Romain

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • 8/9
    • Performance issue considered closed.
    • Metadata handling improvement considered closed
    • Signal composer unit test coverage improvements in progress.
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 7/12
      • Done. Need icons. Will submit ticket
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
    • 5/31 - WIP for RC2.
    • 6/14 - On track for RC2
    • 6/28 - Still on track RC2
    • 7/12 - See above
    • 7/26 - All merged for rc2
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

July 26, 2018

Attendees: Jan-Simon, Romain, Christian, Michael,

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • 7/12
    • Reviewed roadmap and updated
    • Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
    • FF effort is now testing and bug-fixing
  • 7/26
    • Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
    • Improvement on metadata handling
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
    • 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 7/12
      • Done. Need icons. Will submit ticket
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
    • 7/26
      • No update
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
    • 5/31 - WIP for RC2.
    • 6/14 - On track for RC2
    • 6/28 - Still on track RC2
    • 7/12 - See above
    • 7/26 - All merged for rc2
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
    • 7/26 - No update
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates
    • 7/26
      • New lin kernel module pending for rc3

New Business:

July 12, 2018

Attendees: Walt, Jan-Simon, Sebastien, Matt, Romain

  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
    • 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 7/12
      • Done. Need icons. Will submit ticket.
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
    • 7/12
      • Matt R cranking along.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
    • 5/31 - WIP for RC2.
    • 6/14 - On track for RC2
    • 6/28 - Still on track RC2
    • 7/12 - See above
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.
    • 7/12
      • No updates

New Business:

June 28, 2018

Attendees: Walt, Romain, Matt P, Kusakabe, Sebastien, Stephane

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • 4/19
    • Discussions with Oliver Hartkopp went well last week in Karlsruhe.
    • Jonathan still chugging along.
    • Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
  • 5/3
    • SPEC-1419 - Romain working on changing the signal composer to a more flexible meta-data storage model. Need Jira ticket.
    • Jonathan working on testing the low level CAN. See discussion below about creating reusable test plans.
  • 5/17
    • SPEC-1419 - Will not be available until the end of June. Romain on vacation the next three weeks.
    • SPEC-1407 - Data collection for V2C use cases. Most likely a demo for AMM and targeted for Grumpy Guppy.
    • Jonathan continuing with test plans and procedures for low-level CAN. (Need Jira)
  • 5/31
  • 6/14
    • Signal composer changes will be pushed ASAP by Romain now that he is bacl
    • Romain working on lua scripts for low level can tests. Should be ready next week.
  • 6/28
    • Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
    • Low-level CAN tests to be pushed today.
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 4/19 - Matt R. posted patches to rework the Bluetooth settings app
    • 5/4 - Matt R. still hammering away it. A bunch of patches were merged.
    • 5/17 - Matt R. back ports to eel have been submitted. Testing these because it looks like there have been some regressions on eel. Not sure if this is related to the backports or something else.
      • Asynchronous disconnect and reconnect of Bluetooth devices is not being handled correctly by the binding. Matt P. working on fixes for that.
    • 5/31 - Matt R sent all fixes to Eel. Matt R also tested in 'real life' environment.
    • 6/14 - Set for ALS on Eel
    • 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
    • 4/19
      • SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
    • 5/3
      • SPEC-1382 - In sandbox and testing. Matt adding some error handling before pushing to master.
    • 5/17
      • SPEC-1382 - Matt working through the subtasks listed in the ticket. Coming together for FF RC1.
    • 5/31
      • SPEC-1382 - UI related subtasks done, on-track for binding backend for RC1.
    • 6/14
      • SPEC-1382 - Coming together. First parts submitted. Waiting for repo creation for binding.
    • 6/28
      • SPEC-1382 - Submitted. Ready for RC1
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
    • 6/28
      • Matt R still working on
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
    • 5/31 - WIP for RC2.
    • 6/14 - On track for RC2
    • 6/28 - Still on track RC2
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only. Post-FF.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
  • Discussed test methodology and packaging for CIAT tests. Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
    • Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 5/17 - Michael working on a replacement to the HVAC firmware. Should be finished next week. Soya is working with Kusakabe in Japan to get this working.
    • 5/31
      • New HVAC firmware done (Michael / MCHP). New hardware/new firmware for HVAC controller board.
      • Kusakabe-san: Kingfisher + LIN works.
    • 6/14
      • Kusakabe successfully integrated new LIN transceiver into ALS demo.
      • Microchip successfully integrated new firmware for the HVAC controller board into the ALS demo.
    • 6/28
      • Kusakabe pushing new LIN kernel module and HVAC application into master next week.
      • Next will look at haptic devices.

New Business:

June 14, 2018

Attendees: Walt, Jan-Simon, Matt Porter, Sebastien, Romain, Ronan

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • 4/19
    • Discussions with Oliver Hartkopp went well last week in Karlsruhe.
    • Jonathan still chugging along.
    • Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
  • 5/3
    • SPEC-1419 - Romain working on changing the signal composer to a more flexible meta-data storage model. Need Jira ticket.
    • Jonathan working on testing the low level CAN. See discussion below about creating reusable test plans.
  • 5/17
    • SPEC-1419 - Will not be available until the end of June. Romain on vacation the next three weeks.
    • SPEC-1407 - Data collection for V2C use cases. Most likely a demo for AMM and targeted for Grumpy Guppy.
    • Jonathan continuing with test plans and procedures for low-level CAN. (Need Jira)
  • 5/31
  • 6/14
    • Signal composer changes will be pushed ASAP by Romain now that he is bacl
    • Romain working on lua scripts for low level can tests. Should be ready next week.
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 4/19 - Matt R. posted patches to rework the Bluetooth settings app
    • 5/4 - Matt R. still hammering away it. A bunch of patches were merged.
    • 5/17 - Matt R. back ports to eel have been submitted. Testing these because it looks like there have been some regressions on eel. Not sure if this is related to the backports or something else.
      • Asynchronous disconnect and reconnect of Bluetooth devices is not being handled correctly by the binding. Matt P. working on fixes for that.
    • 5/31 - Matt R sent all fixes to Eel. Matt R also tested in 'real life' environment.
    • 6/14 - Set for ALS on Eel
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
    • 4/19
      • SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
    • 5/3
      • SPEC-1382 - In sandbox and testing. Matt adding some error handling before pushing to master.
    • 5/17
      • SPEC-1382 - Matt working through the subtasks listed in the ticket. Coming together for FF RC1.
    • 5/31
      • SPEC-1382 - UI related subtasks done, on-track for binding backend for RC1.
    • 6/14
      • SPEC-1382 - Coming together. First parts submitted. Waiting for repo creation for binding.
  • NFC - Use of NFC for user identification.
    • On-hold
    • 6/14
      • Matt R started digging into
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
    • 5/31 - WIP for RC2.
    • 6/14 - On track for RC2
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only. Post-FF.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
  • Discussed test methodology and packaging for CIAT tests. Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
    • Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 5/17 - Michael working on a replacement to the HVAC firmware. Should be finished next week. Soya is working with Kusakabe in Japan to get this working.
    • 5/31
      • New HVAC firmware done (Michael / MCHP). New hardware/new firmware for HVAC controller board.
      • Kusakabe-san: Kingfisher + LIN works.
    • 6/14
      • Kusakabe successfully integrated new LIN transceiver into ALS demo.
      • Microchip successfully integrated new firmware for the HVAC controller board into the ALS demo.

New Business:

May 31, 2018

Attendees: Jan-Simon, Jonathan Aillet, Matt Porter, Kusakabe-san,

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • 4/19
    • Discussions with Oliver Hartkopp went well last week in Karlsruhe.
    • Jonathan still chugging along.
    • Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
  • 5/3
    • SPEC-1419 - Romain working on changing the signal composer to a more flexible meta-data storage model. Need Jira ticket.
    • Jonathan working on testing the low level CAN. See discussion below about creating reusable test plans.
  • 5/17
    • SPEC-1419 - Will not be available until the end of June. Romain on vacation the next three weeks.
    • SPEC-1407 - Data collection for V2C use cases. Most likely a demo for AMM and targeted for Grumpy Guppy.
    • Jonathan continuing with test plans and procedures for low-level CAN. (Need Jira)
  • 5/31
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 4/19 - Matt R. posted patches to rework the Bluetooth settings app
    • 5/4 - Matt R. still hammering away it. A bunch of patches were merged.
    • 5/17 - Matt R. back ports to eel have been submitted. Testing these because it looks like there have been some regressions on eel. Not sure if this is related to the backports or something else.
      • Asynchronous disconnect and reconnect of Bluetooth devices is not being handled correctly by the binding. Matt P. working on fixes for that.
    • 5/31 - Matt R sent all fixes to Eel. Matt R also tested in 'real life' environment.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
    • 4/19
      • SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
    • 5/3
      • SPEC-1382 - In sandbox and testing. Matt adding some error handling before pushing to master.
    • 5/17
      • SPEC-1382 - Matt working through the subtasks listed in the ticket. Coming together for FF RC1.
    • 5/31
      • SPEC-1382 - UI related subtasks done, on-track for binding backend for RC1.
  • NFC - Use of NFC for user identification.
    • On-hold
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
    • 5/31 - WIP for RC2.
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only. Post-FF.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
  • Discussed test methodology and packaging for CIAT tests. Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
    • Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 5/17 - Michael working on a replacement to the HVAC firmware. Should be finished next week. Soya is working with Kusakabe in Japan to get this working.
    • 5/31
      • New HVAC firmware done (Michael / MCHP). New hardware/new firmware for HVAC controller board.
      • Kusakabe-san: Kingfisher + LIN works.

New Business:

  • 5/31

May 17, 2018

Attendees: Walt, Sebastien, Michael, Stephane, Romain, Jonathan, Matt, Tiejun

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • 4/19
    • Discussions with Oliver Hartkopp went well last week in Karlsruhe.
    • Jonathan still chugging along.
    • Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
  • 5/3
    • SPEC-1419 - Romain working on changing the signal composer to a more flexible meta-data storage model. Need Jira ticket.
    • Jonathan working on testing the low level CAN. See discussion below about creating reusable test plans.
  • 5/17
    • SPEC-1419 - Will not be available until the end of June. Romain on vacation the next three weeks.
    • SPEC-1407 - Data collection for V2C use cases. Most likely a demo for AMM and targeted for Grumpy Guppy.
    • Jonathan continuing with test plans and procedures for low-level CAN. (Need Jira)
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 4/19 - Matt R. posted patches to rework the Bluetooth settings app
    • 5/4 - Matt R. still hammering away it. A bunch of patches were merged.
    • 5/17 - Matt R. back ports to eel have been submitted. Testing these because it looks like there have been some regressions on eel. Not sure if this is related to the backports or something else.
      • Asynchronous disconnect and reconnect of Bluetooth devices is not being handled correctly by the binding. Matt P. working on fixes for that.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
    • 4/19
      • SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
    • 5/3
      • SPEC-1382 - In sandbox and testing. Matt adding some error handling before pushing to master.
    • 5/17
      • SPEC-1382 - Matt working through the subtasks listed in the ticket. Coming together for FF RC1.
  • NFC - Use of NFC for user identification.
    • On-hold
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
    • 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
  • Discussed test methodology and packaging for CIAT tests. Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
    • 5/17 - Michael working on a replacement to the HVAC firmware. Should be finished next week. Soya is working with Kusakabe in Japan to get this working.

New Business:

May 3, 2018

Attendees: Walt, Jan-Simon, Romain, Michael, Matt, Sebastien, Jonathan

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • 4/19
    • Discussions with Oliver Hartkopp went well last week in Karlsruhe.
    • Jonathan still chugging along.
    • Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
  • 5/3
    • SPEC-1419 - Romain working on changing the signal composer to a more flexible meta-data storage model. Need Jira ticket.
    • Jonathan working on testing the low level CAN. See discussion below about creating reusable test plans.
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 4/19 - Matt R. posted patches to rework the Bluetooth settings app
    • 5/4 - Matt R. still hammering away it. A bunch of patches were merged.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
    • 4/19
      • SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
    • 5/3
      • SPEC-1382 - In sandbox and testing. Matt adding some error handling before pushing to master.
  • NFC - Use of NFC for user identification.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
    • 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw. Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the

New Business:

  • Discussed test methodology and packaging for CIAT tests. Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
  • Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware. Michael trying to help Kusakabe out, but cannot get in touch with him due to Golden Week in Japan.

April 19, 2018

Attendees:Walt, Jan-Simon, Sebastien, Jonathan, Romain, Michael

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • 4/19
    • Discussions with Oliver Hartkopp went well last week in Karlsruhe.
    • Jonathan still chugging along.
    • Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
    • 4/19 - Matt R. posted patches to rework the Bluetooth settings app
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
    • 4/19
      • SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
  • NFC - Use of NFC for user identification.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
    • 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the

New:

Code reviewers for EG: Matt, Romain, Kusakabe, Scott, Jonathan

April 5, 2018

Attendees: Walt, Jan-Simon, Sebastien, Romain, Dennis, Stephane, Jonathan, Matt, Michael

  • Vehicle Signaling
  • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
  • Run-time creation of virtual messages has been added to master
  • 3/22
    • SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
    • SPEC-1347 - Adding “EngineOn” to low level CAN binding
    • New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
    • SPEC-1344 - Check with Jan-Simon
  • 4/5
    • SPEC-1344 - Done
    • SPEC-1347 - Jonathan almost finished.
    • SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
    • Test cases - Start with CAN low-level services.
  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
  • Telephony Updates
    • PBAP and Contact app in progress.
    • 4/5
      • SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
  • NFC - Use of NFC for user identification.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
    • 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal - Oshri was emailing Oliver H. about getting the

New:

Code reviewers for EG: Matt, Romain, Kusakabe, Scott, Stephane

March 22, 2018

Attendees: Walt, Romain, Jonathan, Matt

  • Bluetooth and Wifi Updates
    • Dependent on network connectivity update below.
  • Telephony Updates
    • PBAP and Contact app in progress. Matt to create Jira ticket.
  • NFC - Use of NFC for user identification.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • SPEC-1274 - In progress
  • User profiles to allow authorized users to configure Wifi and BT
  • Support for additional wifi dongles and modes. Currently station mode only.
  • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • SafeRide Proposal

New:

March 8, 2018

Attendees: Walt, Jan-Simon, Michael, Sebastien, Romain, Jonathan

  • Bluetooth and Wifi Updates
  • Telephony Updates
  • NFC - Use of NFC for user identification.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.

New:

  • SafeRide Proposal

January 25, 2018

Attendees: Walt, Jan-Simon, Sebastien, Stephane, Michael, Christian

  • CES Demo
    • Kingfisher Advanced board proposed to be used. Late October deliver expected from Shimafuji. IoT.bzh will start looking at their board to verify the in BSP and connectivity to the external modules.
    • 11/2 - Kingfisher boards arrived in Yokohama. BSP in progress at IoT.bzh, but they are having issues because Cogent did a “proof of concept” BSP that is a fork of an older Renesas BSP and there is no easy way to port if to the current upstream Renesas BSP.
    • 11/16 - Ongoing work in Yokohama
    • 11/30 - BSP being sorted out. Kingfisher being merged to master in meta-renesas-rcar-gen3 but there are a quite a few (60+) patches to be merged. Konsulko does not have the board, except for Scott. Backup plan to use ULCB with a bunch of USB dongles would still be a problem with BT audio for telephony.
  • Vehicle Signaling
    • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
    • 11/2 - Work delayed because Romain was pulled into Window Manager effort. Concern that there is not a set of reference CAN messages or an reference app to make available as part of the release. Walt would like to get the code into EE to encourage people to start using it and we can fix any defects as they are found.
    • 11/16 - No progress. Romain still working on Window Manager, HMI, XDG, etc effort.
    • 11/30 - Romain did some work on the signal composer. Need to create a list of features and test apps available for EE.
    • 12/14 - agl-service-signal-composer repo created. Romain pushed his code there. Need to make a recipe for RC5 to make it available for EE. Documentation will be updated on the web site as well.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • 11/2 - Matt working on fixing the new UI pushed by ALPS.
      • 11/16 - Bluez/ALSA and ofono/PulseAudio integrations needs to be completed for EE.
      • 11/30 - Bluetooth audio for telephony is an issue on Renesas Gen3. TI with BT dongle on Eel works for old audio manager, but NOT 4a. Neither case works for Gen3.
      • 12/14 - See SPEC-1175 for details on KF board.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - Matt looking at asynchronous events to the telephone QML app. Having issues with the SCO voice connection for HFP so Matt is working with Vayu rather ULCB.
    • 11/2 - Everything is in except the cleanup to make it standalone. Asynchronous event handing code is in progress. Talked about whether/ how to make it generic in such a way to make it work with GUI toolkits other than Qt, but that is a much bigger job.
    • 11/16 - Work completed on asynchronous event handling for telephony.
    • 12/14 - SCO issues with KF persist. See SPEC-1175 for any updates.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 10/5 - Will have binding for EE available. Still working on the exact solution whether it is user space (lib-nfc) or kernel driver (neard). Problems with getting data from “random” chips since there a multitude of different RFID solutions out there. Should be ok for the demo case where we use known chips.
      • 11/1 - First version released (https://github.com/iotbzh/nfc-binding) See the github page for a list of tags that have been tested. There have been issues with the ARC122U readers.
      • 11/16 - No update
      • 11/30 - Stephane will push the latest binding to gerrit. Need to get the working reader and tags to Yokohama that will be shipped to Las Vegas. IoT.bzh will provide them.
      • 12/14 - meta-nfc and other repos were created today. Work is progressing in Yokohama and France.
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 10/5 - See above.
      • 11/1 - On hold.
      • 11/30 - On hold.
      • 12/14 - On hold
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
  • Look at open car for Honda bus information to pull together a steering wheel demo.

New:

February 8, 2018

Attendees: Walt, Jan-Simon, Sebastien, Stephane, Michael, Christian, Romain,

  • Vehicle Signaling
    • 2/8 - Romain and Jonathan investigating adding J1939 to CAN protocol. Demo of the signal composer binding is being planned to be shown later in the year (Apr/Jun).
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • 11/2 - Matt working on fixing the new UI pushed by ALPS.
      • 11/16 - Bluez/ALSA and ofono/PulseAudio integrations needs to be completed for EE.
      • 11/30 - Bluetooth audio for telephony is an issue on Renesas Gen3. TI with BT dongle on Eel works for old audio manager, but NOT 4a. Neither case works for Gen3.
      • 12/14 - See SPEC-1175 for details on KF board.
      • 2/8 - No update
  • Telephony Updates
    • 2/8 - Ronan working on getting Bluetooth/ Pulseaudio working with 4a.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 2/8 - Will reevaluate support NFC support after rocko update is complete to see if the kernel updates bring better support with it. NFC binder support will move to Konsulko.
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 2/8 - Matt now debugging PBAP binding.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
    • 2/8 - Assigned to Konsulko

New:

January 11, 2018

Attendees: Upcoming Meeting Cancel due to CES.

December 28, 2017

Attendees: Upcoming Meeting Cancel due to holidays.

December 14, 2017

Attendees: Walt, Michael, Christian, Stephane, Sebastien, Romain, Matt

Discuss on Dec 14 whether we need to have Dec 21 meeting.

  • CES Demo
    • Kingfisher Advanced board proposed to be used. Late October deliver expected from Shimafuji. IoT.bzh will start looking at their board to verify the in BSP and connectivity to the external modules.
    • 11/2 - Kingfisher boards arrived in Yokohama. BSP in progress at IoT.bzh, but they are having issues because Cogent did a “proof of concept” BSP that is a fork of an older Renesas BSP and there is no easy way to port if to the current upstream Renesas BSP.
    • 11/16 - Ongoing work in Yokohama
    • 11/30 - BSP being sorted out. Kingfisher being merged to master in meta-renesas-rcar-gen3 but there are a quite a few (60+) patches to be merged. Konsulko does not have the board, except for Scott. Backup plan to use ULCB with a bunch of USB dongles would still be a problem with BT audio for telephony.
  • Vehicle Signaling
    • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
    • 11/2 - Work delayed because Romain was pulled into Window Manager effort. Concern that there is not a set of reference CAN messages or an reference app to make available as part of the release. Walt would like to get the code into EE to encourage people to start using it and we can fix any defects as they are found.
    • 11/16 - No progress. Romain still working on Window Manager, HMI, XDG, etc effort.
    • 11/30 - Romain did some work on the signal composer. Need to create a list of features and test apps available for EE.
    • 12/14 - agl-service-signal-composer repo created. Romain pushed his code there. Need to make a recipe for RC5 to make it available for EE. Documentation will be updated on the web site as well.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • 11/2 - Matt working on fixing the new UI pushed by ALPS.
      • 11/16 - Bluez/ALSA and ofono/PulseAudio integrations needs to be completed for EE.
      • 11/30 - Bluetooth audio for telephony is an issue on Renesas Gen3. TI with BT dongle on Eel works for old audio manager, but NOT 4a. Neither case works for Gen3.
      • 12/14 - See SPEC-1175 for details on KF board.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - Matt looking at asynchronous events to the telephone QML app. Having issues with the SCO voice connection for HFP so Matt is working with Vayu rather ULCB.
    • 11/2 - Everything is in except the cleanup to make it standalone. Asynchronous event handing code is in progress. Talked about whether/ how to make it generic in such a way to make it work with GUI toolkits other than Qt, but that is a much bigger job.
    • 11/16 - Work completed on asynchronous event handling for telephony.
    • 12/14 - SCO issues with KF persist. See SPEC-1175 for any updates.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 10/5 - Will have binding for EE available. Still working on the exact solution whether it is user space (lib-nfc) or kernel driver (neard). Problems with getting data from “random” chips since there a multitude of different RFID solutions out there. Should be ok for the demo case where we use known chips.
      • 11/1 - First version released (https://github.com/iotbzh/nfc-binding) See the github page for a list of tags that have been tested. There have been issues with the ARC122U readers.
      • 11/16 - No update
      • 11/30 - Stephane will push the latest binding to gerrit. Need to get the working reader and tags to Yokohama that will be shipped to Las Vegas. IoT.bzh will provide them.
      • 12/14 - meta-nfc and other repos were created today. Work is progressing in Yokohama and France.
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 10/5 - See above.
      • 11/1 - On hold.
      • 11/30 - On hold.
      • 12/14 - On hold
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update
    • Update 9/20 - Will need to retest for pyro to see if this is still an issue
    • Update 10/5 - No update
  • Look at open car for Honda bus information to pull together a steering wheel demo.

New:

  • Plan for December meetings?
    • Cancel Dec 28.

November 30, 2017

Attendees: Walt, Jan-Simon, Romain, Matt, Stephane, Sebastien, Michael, Chris

  • CES Demo
    • Kingfisher Advanced board proposed to be used. Late October deliver expected from Shimafuji. IoT.bzh will start looking at their board to verify the in BSP and connectivity to the external modules.
    • 11/2 - Kingfisher boards arrived in Yokohama. BSP in progress at IoT.bzh, but they are having issues because Cogent did a “proof of concept” BSP that is a fork of an older Renesas BSP and there is no easy way to port if to the current upstream Renesas BSP.
    • 11/16 - Ongoing work in Yokohama
    • 11/30 - BSP being sorted out. Kingfisher being merged to master in meta-renesas-rcar-gen3 but there are a quite a few (60+) patches to be merged. Konsulko does not have the board, except for Scott. Backup plan to use ULCB with a bunch of USB dongles would still be a problem with BT audio for telephony.
  • Vehicle Signaling
    • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
    • 11/2 - Work delayed because Romain was pulled into Window Manager effort. Concern that there is not a set of reference CAN messages or an reference app to make available as part of the release. Walt would like to get the code into EE to encourage people to start using it and we can fix any defects as they are found.
    • 11/16 - No progress. Romain still working on Window Manager, HMI, XDG, etc effort.
    • 11/30 - Romain did some work on the signal composer. Need to create a list of features and test apps available for EE.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • 11/2 - Matt working on fixing the new UI pushed by ALPS.
      • 11/16 - Bluez/ALSA and ofono/PulseAudio integrations needs to be completed for EE.
      • 11/30 - Bluetooth audio for telephony is an issue on Renesas Gen3. TI with BT dongle on Eel works for old audio manager, but NOT 4a. Neither case works for Gen3.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - Matt looking at asynchronous events to the telephone QML app. Having issues with the SCO voice connection for HFP so Matt is working with Vayu rather ULCB.
    • 11/2 - Everything is in except the cleanup to make it standalone. Asynchronous event handing code is in progress. Talked about whether/ how to make it generic in such a way to make it work with GUI toolkits other than Qt, but that is a much bigger job.
    • 11/16 - Work completed on asynchronous event handling for telephony.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 10/5 - Will have binding for EE available. Still working on the exact solution whether it is user space (lib-nfc) or kernel driver (neard). Problems with getting data from “random” chips since there a multitude of different RFID solutions out there. Should be ok for the demo case where we use known chips.
      • 11/1 - First version released (https://github.com/iotbzh/nfc-binding) See the github page for a list of tags that have been tested. There have been issues with the ARC122U readers.
      • 11/16 - No update
      • 11/30 - Stephane will push the latest binding to gerrit. Need to get the working reader and tags to Yokohama that will be shipped to Las Vegas. IoT.bzh will provide them.
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 10/5 - See above.
      • 11/1 - On hold.
      • 11/30 - On hold.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update
    • Update 9/20 - Will need to retest for pyro to see if this is still an issue
    • Update 10/5 - No update
  • Look at open car for Honda bus information to pull together a steering wheel demo.

New:

  • Plan for December meetings?

November 16, 2017

Attendees: Walt, Christian, Michael, Romain, Sebastien, Matt

Agenda:

  • CES Demo
    • Kingfisher Advanced board proposed to be used. Late October deliver expected from Shimafuji. IoT.bzh will start looking at their board to verify the in BSP and connectivity to the external modules.
    • 11/2 - Kingfisher boards arrived in Yokohama. BSP in progress at IoT.bzh, but they are having issues because Cogent did a “proof of concept” BSP that is a fork of an older Renesas BSP and there is no easy way to port if to the current upstream Renesas BSP.
    • 11/16 - Ongoing work in Yokohama
  • Vehicle Signaling
    • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
    • Face to Face meeting to be held in Vannes on Sep 5 - 7 to work on vehicle signaling improvements for EE release.
    • 8/24 - gerrit 10107 should be ready to merge. Vannes workshop on track for Sep 5 - 7. Romain organizing and will post the agenda on the wiki page.
    • 9/7 - No update. The face to face meeting in Vannes is ongoing.
    • 9/20 - Updates from Vannes is available. Reviewed the drawing. https://github.com/iotbzh/afb-signal-composer/blob/sandbox/claneys/wip/docs/part-1/pictures/Global_Signaling_Architecture.png Discussed possibility for automotive steering wheel components for the CES demo. See action item in below.
    • 10/5 - Pre-alpha version of the binding is available in github (rawing. https://github.com/iotbzh/afb-signal-composer). Will be available as part of the EE release.
    • 11/2 - Work delayed because Romain was pulled into Window Manager effort. Concern that there is not a set of reference CAN messages or an reference app to make available as part of the release. Walt would like to get the code into EE to encourage people to start using it and we can fix any defects as they are found.
    • 11/16 - No progress. Romain still working on Window Manager, HMI, XDG, etc effort.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
    • Update 8/24
      • Bindings now updated to v2.
      • Telephony binding split out from the Bluetooth binding
    • 9/7 - No update.
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - No regressions noted on master for the DD functionality. Matt contacting ALPS about PBAP profile and what they are doing in that area.
    • 11/2 - Matt working on fixing the new UI pushed by ALPS.
    • 11/16 - Bluez/ALSA and ofono/PulseAudio integrations needs to be completed for EE.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - Matt looking at asynchronous events to the telephone QML app. Having issues with the SCO voice connection for HFP so Matt is working with Vayu rather ULCB.
    • 11/2 - Everything is in except the cleanup to make it standalone. Asynchronous event handing code is in progress. Talked about whether/ how to make it generic in such a way to make it work with GUI toolkits other than Qt, but that is a much bigger job.
    • 11/16 - Work completed on asynchronous event handling for telephony.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 10/5 - Will have binding for EE available. Still working on the exact solution whether it is user space (lib-nfc) or kernel driver (neard). Problems with getting data from “random” chips since there a multitude of different RFID solutions out there. Should be ok for the demo case where we use known chips.
      • 11/1 - First version released (https://github.com/iotbzh/nfc-binding) See the github page for a list of tags that have been tested. There have been issues with the ARC122U readers.
      • 11/16 - No update
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 10/5 - See above.
      • 11/1 - On hold.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update
    • Update 9/20 - Will need to retest for pyro to see if this is still an issue
    • Update 10/5 - No update
  • Look at open car for Honda bus information to pull together a steering wheel demo.

New:


November 2, 2017

Attendees: Walt, Jan-Simon, Romain, Stephane, Sebastien, Matt

Agenda:

  • CES Demo
    • Kingfisher Advanced board proposed to be used. Late October deliver expected from Shimafuji. IoT.bzh will start looking at their board to verify the in BSP and connectivity to the external modules.
    • 11/2 - Kingfisher boards arrived in Yokohama. BSP in progress at IoT.bzh, but they are having issues because Cogent did a “proof of concept” BSP that is a fork of an older Renesas BSP and there is no easy way to port if to the current upstream Renesas BSP.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
    • Update 8/24
      • Bindings now updated to v2.
      • Telephony binding split out from the Bluetooth binding
    • 9/7 - No update.
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - No regressions noted on master for the DD functionality. Matt contacting ALPS about PBAP profile and what they are doing in that area.
    • 11/2 - Matt working on fixing the new UI pushed by ALPS.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - Matt looking at asynchronous events to the telephone QML app. Having issues with the SCO voice connection for HFP so Matt is working with Vayu rather ULCB.
    • 11/2 - Everything is in except the cleanup to make it standalone. Asynchronous event handing code is in progress. Talked about whether/ how to make it generic in such a way to make it work with GUI toolkits other than Qt, but that is a much bigger job.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 10/5 - Will have binding for EE available. Still working on the exact solution whether it is user space (lib-nfc) or kernel driver (neard). Problems with getting data from “random” chips since there a multitude of different RFID solutions out there. Should be ok for the demo case where we use known chips.
      • 11/1 - First version released (https://github.com/iotbzh/nfc-binding) See the github page for a list of tags that have been tested. There have been issues with the ARC122U readers.
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 10/5 - See above.
      • 11/1 - On hold.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update
    • Update 9/20 - Will need to retest for pyro to see if this is still an issue
    • Update 10/5 - No update
  • Look at open car for Honda bus information to pull together a steering wheel demo.

New:


October 19, 2017

Canceled due to Dresden AMM.


October 5, 2017

Attendees: Walt, Matt, Stephane, Sebastien, Romain, Fulup, Frederic, Kusakabe

Notes:

  • CES Demo
    • Kingfisher Advanced board proposed to be used. Late October deliver expected from Shimafuji. IoT.bzh will start looking at their board to verify the BSP and connectivity to the external modules.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
    • Update 8/24
      • Bindings now updated to v2.
      • Telephony binding split out from the Bluetooth binding
    • 9/7 - No update.
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - No regressions noted on master for the DD functionality. Matt contacting ALPS about PBAP profile and what they are doing in that area.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
    • 10/5 - Matt looking at asynchronous events to the telephone QML app. Having issues with the SCO voice connection for HFP so Matt is working with Vayu rather ULCB.
  • Roadmap items
    • NFC - Use of NFC for user identification.
      • 10/5 - Will have binding for EE available. Still working on the exact solution whether it is user space (lib-nfc) or kernel driver (neard). Problems with getting data from “random” chips since there a multitude of different RFID solutions out there. Should be ok for the demo case where we use known chips.
  • V2X Connectivity
    • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • 10/5 - Want to kick off in Dresden.
  • Bluetooth profiles -
    • Phone book/contacts
      • 10/5 - See above.
  • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • User profiles to allow authorized users to configure Wifi and BT
    • Support for additional wifi dongles and modes. Currently station mode only.
    • For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update
    • Update 9/20 - Will need to retest for pyro to see if this is still an issue
    • Update 10/5 - No update

New:

  • Look at open car for Honda bus information to pull together a steering wheel demo.

September 21, 2017

Attendees: Walt, Fulup, Michael, Milan, Stephane, Sebastien

Notes:

  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
    • Update 8/24
      • Bindings now updated to v2.
      • Telephony binding split out from the Bluetooth binding
    • 9/7 - No update.
    • 9/20 - Looking at regressions introduced in the pyro update to master.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
    • 9/20 - Looking at regressions introduced in the pyro update to master.
  • Roadmap items
    • NFC - Use of NFC for user identification
    • V2X Connectivity
      • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • Bluetooth profiles -
      • Phone book/contacts
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • User profiles to allow authorized users to configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update
    • Update 9/20 - Will need to retest for pyro to see if this is still and issue

New:

  • Look at open car for Honda bus information to pull together a steering wheel demo.

———

September 7, 2017

Attendees: Walt, Sebastien, Michael

Notes:

  • Vehicle Signaling
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
    • Update 8/24
      • Bindings now updated to v2.
      • Telephony binding split out from the Bluetooth binding
    • 9/7 - No update.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
    • 9/7 - No update
  • Roadmap items
    • NFC - Use of NFC for user identification
    • V2X Connectivity
      • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • Bluetooth profiles -
      • Phone book/contacts
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • User profiles to allow authorized users to configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update

New:


August 24, 2017

Attendees: Walt, Christian, Michael, Matt, Romain

Notes:

  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
    • Update 8/24
      • Bindings now updated to v2.
      • Telephony binding split out from the Bluetooth binding
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
    • Update 8/24
      • Telephone binding now standalone.
      • Working on verb syntax for bindings. Will discuss at the F2F in Yokohama next week.
      • Phone book and contact database investigations ongoing. Matt P. looking at best practices in other spaces (Android, etc.)
  • Roadmap items
    • NFC - Use of NFC for user identification
    • V2X Connectivity
      • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • Bluetooth profiles -
      • Phone book/contacts
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • User profiles to allow authorized users to configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update

New:


August 10, 2017

Attendees: Jan-Simon, Romain, Christian, Michael

Notes:

  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
    • Update 10.8.:
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
    • Update 10.8.:
      • Update to v2 and aligning verbs used between bindings.
      • Work on moving to a standalone binding.
      • Looking into phone book profile
  • Roadmap items
    • NFC - Use of NFC for user identification
    • V2X Connectivity
      • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • Bluetooth profiles -
      • Phone book/contacts
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • User profiles to allow authorized users to configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.
    • Update 10.8.: no update

New:


July 27, 2017

Attendees: Walt, Jan-Simon, Kusakabe, Dennis, Matt

Notes:

  • Vehicle Signaling
    • SPEC-428 - CAN low level binding will be included in DD. - Closed
    • High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
    • Face to Face meeting to be held in Vannes on Sep 5 - 7 to work on vehicle signaling improvements for EE release.
  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
    • EE improvements
      • Performance and reliability of Bluetooth connections. Matt says partially due to binding implementations and partly in the demo UI.
      • Autoconnect of paired devices. Currently requires user intervention to reconnect to paired devices.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
    • EE improvements
      • Move to a standalone service binding
      • Build out feature set for telephony (multipart call, phone book, reliability)
  • Roadmap items
    • NFC - Use of NFC for user identification
    • V2X Connectivity
      • V2C EG proposed at San Jose F2F. In progress of forming that now.
    • Bluetooth profiles -
      • Phone book/contacts
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • User profiles to allow authorized users to configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.

Other:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.

New:


July 13, 2017

Meeting cancelled due to F2F meeting in San Jose


June 29, 2017

Attendees: Upcoming Meeting


June 15, 2017

Attendees: Walt, Fulup, Kusakabe, Dennis

Notes:

  • Bluetooth and Wifi Updates
    • A2DP, HFP, AVRCP included in DD with reference apps.
  • Telephony Updates
    • Initial implementation in DD with reference phone app.
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
      • Update 4/20: discussed above
    • Telephony - need binder for ofono
      • Update 4/20: discussed above
    • NFC - Use of NFC for user identification
      • Update 4/20: no update
      • Update 5/4 - No update
    • V2X Connectivity (add BoF to AMM)
      • Update 4/20: no update
      • Update 5/4 - No update
    • Bluetooth profiles -
      • HFP
        • need to connect audio to the board. Milan not sure how to do this with the BT dongle.
        • Need service binder for ofono
      • Phone book/contacts
      • A2DP - works.
        • Update 5/4 - Matt R reported a problem with bluez crashing during streaming due to SMACK. SPEC-554
      • AVRCP - Needs to be integrated into the media player
        • Update 4/20: - patches in gerrit for review 9077, 9121
          • Matt Porter: non-binder version. version with binder post-ALS
          • Stephane: Question - why no binder? What are the issues?
          • Matt Porter: focus on functionality for demo before binders, some areas still in flux (audio)
        • Update 5/4 - changes merged from Matt R. Binder will be coming soon.
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • Update 5/4: - no update
    • Documented networking and Bluetooth API for AGL for DD Release
      • Update 5/4: - no update
    • Improved wifi and Bluetooth settings and management
      • Event based instead of polling
      • For the following items (and more) we should define the user cases we want to enable
      • Multiuser for BT and Wifi and connections. For example allowing access to BT device when a specific user(s) is in the vehicle.
      • Multiple connection management (managing multiple remote devices and switching between them) for Wifi and BT.
      • Basic security definition concerning who can configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.
      • Update 5/4: - SPEC-528 https://gerrit.automotivelinux.org/gerrit/#/c/9057/ , but no update on above
    • We need to make sure we capture video of the Wifi and BT settings applications at the AMM to add to our video collection.

New:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.

May 25, 2017

Attendees: Walt, Kurokawa, Matsuzawa

Notes:

  • Abbreviated meeting due to bank holiday in France and Germany.

May 4, 2017

Attendees: Walt, Jan-Simon, Stephane, Romain, Fulup

Notes:

  • Vehicle Signaling
    • SPEC-428 - CAN low level binding. End of March delivery
    • Michael contacted Tobias about CAN simulator for AGL. K2L has different solutions so Tobias will contact us to let us know what is possible.
    • Need CAN reference characterization from cockpit reference group
    • Update 3/23 - Had a review of the IoT.bzh design and code that is in github. Based on the discussion we added some items to the F2F meeting agenda in Karlsruhe.
    • Update 4/20 - from F2F in KA
      • Iot.bzh Demo of on-going work (https://github.com/iotbzh/CAN_signaling)
      • Fujitsu-Ten approach to CAN signaling (Kusakabe)(20170402_ften_can_kusakabe_v2.pdf)
      • Romain: Work on filtering capabilities (~ next week)
      • Romain: discussion on CAN interface naming
      • Inclusion of low-level can binder in platform for DD to be discussed in dev-call / SAT meeting (location? github or gerrit).
      • Update 5/4 - Romain filtering capabilities will be in DD. A prototype version of ViWi will be available in DD. Low level API will be stable for DD. Question came up of how do we distribute the service to developers that want to use it or try it out. At this time we do not have “Store” so we discussed making it available to be built with the SDK for developers that want to use it. Should be kicked up to the SAT for further discussion on having a store available in EE.
  • Telephony Updates
    • Matt reports he is making some progress. Can connect a call, playing with echo cancellation.
    • Update 3/23 - Matt not on call. Nothing to report.
    • Update 4/20: - PoC working, w/o echo cancellation, postponed due to volume management
      • on-track for ALS but initially w/o proper binder, proper binder after ALS
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
      • Update 4/20: discussed above
    • Telephony - need binder for ofono
      • Update 4/20: discussed above
    • NFC - Use of NFC for user identification
      • Update 4/20: no update
      • Update 5/4 - No update
    • V2X Connectivity (add BoF to AMM)
      • Update 4/20: no update
      • Update 5/4 - No update
    • Bluetooth profiles -
      • HFP
        • need to connect audio to the board. Milan not sure how to do this with the BT dongle.
        • Need service binder for ofono
      • Phone book/contacts
      • A2DP - works.
        • Update 5/4 - Matt R reported a problem with bluez crashing during streaming due to SMACK. SPEC-554
      • AVRCP - Needs to be integrated into the media player
        • Update 4/20: - patches in gerrit for review 9077, 9121
          • Matt Porter: non-binder version. version with binder post-ALS
          • Stephane: Question - why no binder? What are the issues?
          • Matt Porter: focus on functionality for demo before binders, some areas still in flux (audio)
        • Update 5/4 - changes merged from Matt R. Binder will be coming soon.
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • Update 5/4: - no update
    • Documented networking and Bluetooth API for AGL for DD Release
      • Update 5/4: - no update
    • Improved wifi and Bluetooth settings and management
      • Event based instead of polling
      • For the following items (and more) we should define the user cases we want to enable
      • Multiuser for BT and Wifi and connections. For example allowing access to BT device when a specific user(s) is in the vehicle.
      • Multiple connection management (managing multiple remote devices and switching between them) for Wifi and BT.
      • Basic security definition concerning who can configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.
      • Update 5/4: - SPEC-528 https://gerrit.automotivelinux.org/gerrit/#/c/9057/ , but no update on above
    • We need to make sure we capture video of the Wifi and BT settings applications at the AMM to add to our video collection.

New:

  • SPEC-490 - IPv6 support. Is this a problem across all of the BSPs? Stephane waiting for updated BSP from Renesas (2.19) to retest.

April 20, 2017

Attendees: Jan-Simon, Matt, Stephane, Romain, Kusakabe-san, Chris, Michael

Notes:

  • Vehicle Signaling
    • SPEC-428 - CAN low level binding. End of March delivery
    • Michael contacted Tobias about CAN simulator for AGL. K2L has different solutions so Tobias will contact us to let us know what is possible.
    • Need CAN reference characterization from cockpit reference group
    • Update 3/23 - Had a review of the IoT.bzh design and code that is in github. Based on the discussion we added some items to the F2F meeting agenda in Karlsruhe.
    • Update 4/20 - from F2F in KA
      • Iot.bzh Demo of on-going work (https://github.com/iotbzh/CAN_signaling)
      • Fujitsu-Ten approach to CAN signaling (Kusakabe)(20170402_ften_can_kusakabe_v2.pdf)
      • Romain: Work on filtering capabilities (~ next week)
      • Romain: discussion on CAN interface naming
      • Inclusion of low-level can binder in platform for DD to be discussed in dev-call / SAT meeting (location? github or gerrit).
  • Telephony Updates
    • Matt reports he is making some progress. Can connect a call, playing with echo cancellation.
    • Update 3/23 - Matt not on call. Nothing to report.
    • Update 4/20: - PoC working, w/o echo cancellation, postponed due to volume management
      • on-track for ALS but initially w/o proper binder, proper binder after ALS
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
      • Update 4/20: discussed above
    • Telephony - need binder for ofono
      • Update 4/20: discussed above
    • NFC - Use of NFC for user identification
      • Update 4/20: no update
    • V2X Connectivity (add BoF to AMM)
      • Update 4/20: no update
    • Bluetooth profiles -
      • HFP
        • need to connect audio to the board. Milan not sure how to do this with the BT dongle.
        • Need service binder for ofono
      • Phone book/contacts
      • A2DP - works. Need to check integration with audio manager. Dennis working with Matt on getting this work. Not having much luck at this point.
      • AVRCP - Needs to be integrated into the media player
        • Update 4/20: - patches in gerrit for review 9077, 9121
          • Matt Porter: non-binder version. version with binder post-ALS
          • Stephane: Question - why no binder? What are the issues?
          • Matt Porter: focus on functionality for demo before binders, some areas still in flux (audio)
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
      • Update 4/20: - no update
    • Documented networking and Bluetooth API for AGL for DD Release
      • Update 4/20: - no update
    • Improved wifi and Bluetooth settings and management
      • Event based instead of polling
      • For the following items (and more) we should define the user cases we want to enable
      • Multiuser for BT and Wifi and connections. For example allowing access to BT device when a specific user(s) is in the vehicle.
      • Multiple connection management (managing multiple remote devices and switching between them) for Wifi and BT.
      • Basic security definition concerning who can configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.
      • Update 4/20: - https://gerrit.automotivelinux.org/gerrit/#/c/9057/ , but no update on above
    • We need to make sure we capture video of the Wifi and BT settings applications at the AMM to add to our video collection.

New:


March 23, 2017

Attendees: Walt, Stephane, Michael, Kusakabe

Notes:

  • Vehicle Signaling
    • SPEC-428 - CAN low level binding. End of March delivery
    • Michael contacted Tobias about CAN simulator for AGL. K2L has different solutions so Tobias will contact us to let us know what is possible.
    • Need CAN reference characterization from cockpit reference group
    • Update 3/23 - Had a review of the IoT.bzh design and code that is in github. Based on the discussion we added some items to the F2F meeting agenda in Karlsruhe.
  • Bluetooth and Wifi Updates
    • Jan-Simon will create Jira issue for APs disappearing and assign to Stephane.
    • Update 3/23 - No Jira yet?
  • Telephony Updates
    • Matt reports he is making some progress. Can connect a call, playing with echo cancellation.
    • Update 3/23 - Matt not on call. Nothing to report.
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
    • Telephony - need binder for ophono
    • NFC - Use of NFC for user identification
    • V2X Connectivity (add BoF to AMM)
    • Bluetooth profiles -
      • HFP
        • need to connect audio to the board. Milan not sure how to do this with the BT dongle.
        • Need service binder for ophono
      • Phone book/contacts
      • A2DP - works. Need to check integration with audio manager. Dennis working with Matt on getting this work. Not having much luck at this point.
      • AVRCP - Needs to be integrated into the media player
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • Documented networking and Bluetooth API for AGL for DD Release
    • Improved wifi and Bluetooth settings and management
      • Event based instead of polling
      • For the following items (and more) we should define the user cases we want to enable
      • Multiuser for BT and Wifi and connections. For example allowing access to BT device when a specific user(s) is in the vehicle.
      • Multiple connection management (managing multiple remote devices and switching between them) for Wifi and BT.
      • Basic security definition concerning who can configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.
    • We need to make sure we capture video of the Wifi and BT settings applications at the AMM to add to our video collection.
    • Add Connectivity EG meeting on Feb 10 at AMM

March 9, 2017

Attendees: Walt, Stephane, Matsuzawa, Jan-Simon, Jens, Matt, Michael, Soya

Notes:

  • Vehicle Signaling
    • SPEC-428 - CAN low level binding. End of March delivery
    • Michael contacted Tobias about CAN simulator for AGL. K2L has different solutions so Tobias will contact us to let us know what is possible.
    • Need CAN reference characterization from cockpit reference group
  • Bluetooth and Wifi Updates
    • Jan-Simon will create Jira issue for APs disappearing and assign to Stephane.
  • Telephony Updates
    • Matt reports he is making some progress. Can connect a call, playing with echo cancellation.
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
    • Telephony - need binder for ophono
    • NFC - Use of NFC for user identification
    • V2X Connectivity (add BoF to AMM)
    • Bluetooth profiles -
      • HFP
        • need to connect audio to the board. Milan not sure how to do this with the BT dongle.
        • Need service binder for ophono
      • Phone book/contacts
      • A2DP - works. Need to check integration with audio manager. Dennis working with Matt on getting this work. Not having much luck at this point.
      • AVRCP - Needs to be integrated into the media player
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • Documented networking and Bluetooth API for AGL for DD Release
    • Improved wifi and Bluetooth settings and management
      • Event based instead of polling
      • For the following items (and more) we should define the user cases we want to enable
      • Multiuser for BT and Wifi and connections. For example allowing access to BT device when a specific user(s) is in the vehicle.
      • Multiple connection management (managing multiple remote devices and switching between them) for Wifi and BT.
      • Basic security definition concerning who can configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.
    • We need to make sure we capture video of the Wifi and BT settings applications at the AMM to add to our video collection.
    • Add Connectivity EG meeting on Feb 10 at AMM

January 26, 2017

Attendees: Walt, Jan-Simon, Fulup, Soya, Stephane, Srimaldia, Milan, Dennis, Michael, Chris

Notes:

  • IoT.bzh and Microchip had a workshop last week in Karlsruhe to discuss app framework, app developments, and vehicle signaling
    • Fulup will present proposal at the AMM in two weeks and the document on docs site will be updated after getting feedback.
    • Created new project for upcoming work to be tracked as part of the roadmap. SPEC-428
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
    • Telephony - need binder for ophono
    • NFC - Use of NFC for user identification
    • V2X Connectivity (add BoF to AMM)
    • Bluetooth profiles -
      • HFP
        • need to connect audio to the board. Milan not sure how to do this with the BT dongle.
        • Need service binder for ophono
      • Phone book/contacts
      • A2DP - works. Need to check integration with audio manager. Dennis working with Matt on getting this work. Not having much luck at this point.
      • AVRCP - Needs to be integrated into the media player
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • Documented networking and Bluetooth API for AGL for DD Release
    • Improved wifi and Bluetooth settings and management
      • Event based instead of polling
      • For the following items (and more) we should define the user cases we want to enable
      • Multiuser for BT and Wifi and connections. For example allowing access to BT device when a specific user(s) is in the vehicle.
      • Multiple connection management (managing multiple remote devices and switching between them) for Wifi and BT.
      • Basic security definition concerning who can configure Wifi and BT
      • Support for additional wifi dongles and modes. Currently station mode only.
    • We need to make sure we capture video of the Wifi and BT settings applications at the AMM to add to our video collection.
    • Add Connectivity EG meeting on Feb 10 at AMM

January 12, 2017

Attendees: Walt, Jan-Simon, Michael, Soya, Stephane

Notes:

  • IoT.bzh and Microchip having a workshop next week in Karlsruhe to discuss app framework, app developments, and vehicle signaling
  • Roadmap items
    • Complete lower level stack through service binder for vehicle signaling especially CAN
    • Telephony
    • NFC
    • V2X Connectivity
    • Bluetooth profiles?
    • General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
    • Improved wifi and Bluetooth settings and management

December 1, 2016

Upcoming Meeting Attendees:

Agenda:

Agenda:

  • BT/Wifi Dongles for CES - Any issues?
  • Bluetooth issues for CES?
  • Wifi issues for CES?
  • Vehicle messaging solution for AGL -
  • Microchip working on integrating their proposed solution with the App Framework so that it is seamless to the apps if the vehicle data or controls are on MOST, CAN, etc.
  • Update - IoT has posted their documentation for signalling to the wiki which will remove AMB as a component. Yury to review and then determine how to rework HVAC. Need to ask Tanikawa-san if the request for vehicle speed data from CAN is to use a software module on the AGL system or a real CAN device. Can follow up on dev call on Tuesday.
    • Audio - Tobias is now working full-time on the audio solution. Looking for a PulseAudio GUI to demonstrate usage of audio in a optical way. Walt will ask Scott Murray about this.
    • Working on some seamless audio controls for MOST and audio in general for automotive
    • Update 11/3 - Matt Porter reported that pavucontrol would be a good way to make the sliders available for audio control. Jan-Simon showed this recipe is available. https://layers.openembedded.org/layerindex/recipe/53088/
  • Microchip asked about threat list for security blueprint. Still waiting

November 17, 2016

Canceled - Yokohama F2F meeting

November 3, 2016

Attendees: Walt, Jan-Simon, Matt, Denis, Michael, Chris, Yury, Tobias, Bai

Agenda:

  • Bluez, Connman compatibility for Yocto 2.1 - not discussed. ALPS will focus on Wifi for now and Bluetooth maybe if time allows. Need to make sure we have someone looking at Bluetooth since a few apps proposed for CES require Bluetooth.
    • ALPS agreed to work on Bluetooth integration which supports discovery and audio connections. Will use a USB dongle (TBD which one) for those platforms that do not have Bluetooth on board.
    • Update 11/3 - For boards without Bluetooth built-in we are using a commercially available USB dongle ASUS USB-BT400 Adapter
    • Need to investigate if the drivers can be released as part of the AGL.
  • ALPS BT/Wifi module - commercial availability and FCC Certification - switching to commercially available dongle. Ishikawa will ask Imamura about acquiring the listed dongles, Another option would be to have Nori purchase some of the recommended dongles prior to the F2F meeting in Yokohama so NTT Data MSE can try those out.
  • Vehicle messaging solution for AGL -
  • Microchip working on integrating their proposed solution with the App Framework so that it is seamless to the apps if the vehicle data or controls are on MOST, CAN, etc.
  • Update - IoT has posted their documentation for signalling to the wiki which will remove AMB as a component. Yury to review and then determine how to rework HVAC. Need to ask Tanikawa-san if the request for vehicle speed data from CAN is to use a software module on the AGL system or a real CAN device. Can follow up on dev call on Tuesday.
    • Audio - Tobias is now working full-time on the audio solution. Looking for a PulseAudio GUI to demonstrate usage of audio in a optical way. Walt will ask Scott Murray about this.
    • Working on some seamless audio controls for MOST and audio in general for automotive
    • Update 11/3 - Matt Porter reported that pavucontrol would be a good way to make the sliders available for audio control. Jan-Simon showed this recipe is available. https://layers.openembedded.org/layerindex/recipe/53088/
  • SDL - Walt needs to set up separate call with Vitus. Two different companies working on CES demos (Livio and Elektrobit)
  • Security topics and possible Microchip presentation. Sent Irdeto slides from AMM to Michael and they will be posted on the AMM event site.
  • Microchip asked about threat list for security blueprint. Still waiting

October 20, 2016

Attendees: Walt, Michael, Christian, Sri Maldia, Milan, Ishikawa

Agenda:

  • Bluez, Connman compatibility for Yocto 2.1 - not discussed. ALPS will focus on Wifi for now and Bluetooth maybe if time allows. Need to make sure we have someone looking at Bluetooth since a few apps proposed for CES require Bluetooth. ALPS agreed to work on Bluetooth integration which supports discovery and audio connections. Will use a USB dongle (TBD which one) for those platforms that do not have Bluetooth on board.
  • ALPS BT/Wifi module - commercial availability and FCC Certification - switching to commercially available dongle. Ishikawa will ask Imamura about acquiring the listed dongles, Another option would be to have Nori purchase some of the recommended dongles prior to the F2F meeting in Yokohama so NTT Data MSE can try those out.
  • Vehicle messaging solution for AGL - Tobias is now working full-time on the audio solution. Looking for a PulseAudio GUI to demonstrate usage of audio in a optical way. Walt will ask Scott Murray about this.
    • Microchip working on integrating their proposed solution with the App Framework so that it is seamless to the apps if the vehicle data or controls are on MOST, CAN, etc.
    • Working on some seamless audio controls for MOST and audio in general for automotive
  • SDL - Walt needs to set up separate call with Vitus
  • Security topics and possible Microchip presentation. Sent Irdeto slides from AMM to Michael and they will be posted on the AMM event site.
  • Microchip asked about threat list for security blueprint. Still waiting

October 6, 2016

Attendees: Walt, Michael, Christian, Tobias, Sri Maldia, Milan, Imamura, Ishikawa

Agenda:

  • Bluez, Connman compatibility for Yocto 2.1 - not discussed. ALPS will focus on Wifi for now and Bluetooth maybe if time allows. Need to make sure we have someone looking at Bluetooth since a few apps proposed for CES require Bluetooth.
  • ALPS BT/Wifi module - commercial availability and FCC Certification - switching to commercially available dongle.
  • ALPS recommends using the Wifi dongles: TL-WN722N , RTL8192 , or CLS Ralink RT5572. All are commercially available and will simplify the process of getting ready for CES.
  • NTT Data MSE is using an NEC dongle for their Miracast demo. They will share the information on which one they are using and ALPS offered to use that one as well.
  • Vehicle messaging solution for AGL - Walt will add time on the F2F agenda to discuss.
    • Microchip working on integrating their proposed solution with the App Framework so that it is seamless to the apps if the vehicle data or controls are on MOST, CAN, etc.
    • Working on some seamless audio controls for MOST and audio in general for automotive
  • SDL - Walt needs to set up separate call with Vitus
  • Security topics and possible Microchip presentation. Sent Irdeto slides from AMM to Michael and they will be posted on the AMM event site.
  • Open discussion
    • Microchip asked about threat list for security blueprint.

September 21, 2016

Attendees: Walt, Christian, Michael

Agenda:

  • Bluez, Connman compatibility for Yocto 2.1 - not discussed
  • ALPS BT/Wifi module - commercial availability and FCC Certification - not discussed
  • Vehicle messaging solution for AGL
    • Microchip working on integrating their proposed solution with the App Framework so that it is seamless to the apps if the vehicle data or controls are on MOST, CAN, etc.
    • Working on some seamless audio controls for MOST and audio in general for automotive
  • SDL - Walt needs to set up separate call with Vitus
  • Open discussion
    • Security topics and possible Microchip presentation. Need to get Irdeto slides from AMM.

September 7, 2016

Attendees: Walt, Michael, Fulup, Vitus, Sri Maldia, Milan, Ahmed, Hiroshi Miura, Hiroto, Keisuke

Agenda:

  • ALPS conman apps for next demo
    • Bluez 4 is compatible with connman. Bluez 5 is not.
    • Bluez 5 is current Yocto 2.1 solution
    • ALPS BT/Wifi module UGKZ7 is the one they have in mind.
      • Not commercially available (automotive Tier 1 specific) would need to request samples from ALPS
    • Is there a commercial module we can use instead?
  • Did some updating of the demo spec and showed some of the AGL requirements spec.
  • Vehicle messaging solution for AGL (AMB or competing solution)
  • SDL Investigation - Vitus can make a presentation at a future meeting on his investigation. Walt will set up a meeting especially dedicated to SDL topics and invite the AGL community.
  • OpenXC for CAN
  • Discussion

August 25, 2016

Attendees: Walt, Stephane, Fulup, Sri Maldia, Milan

Notes:

  • Discussed ALPS proposal on Connman and interfacing to the application framework. Need to push the email conversation to the public list. One question is how do we document the APIs. Led to discussion on OpenAPI collab project within the LF.
  • Walt to arrange meeting with OpenAPI folks from LF. Meeting to determine where they are going with version 3 of OpenAPI and how we could work together. Team is very interested in the automatic testing capability of the tool, maybe less so with code generation until we see how well it works.
  • Investigation into GENIVI, Tizen IVI, SDL, and RVI connectivity APIs would be beneficial to see what we can reuse. RVI includes V2V APIs and vehicle to server. SDL includes phone to car communications. Fulup will write up a Jira issue.
  • OpenXC - Fulup asked if Walt or Dan have some contacts at Ford that we can work with.

August 18, 2016

Meeting Canceled - change to biweekly

August 11, 2016

Attendees: Walt, Chris, Michael, Bai

Notes:

  • Yuri needs to pull in gerrit change 6337 to properly enable keyboard input. Michael will communicate that to him.
  • Canceled the meeting for next week.

August 4, 2016

Attendees: Walt, Michael, Sri Maldia

Notes:

  • Yury - iDrive patch going in this week.
  • Reviewed Michael's responses in SPEC-132 and SPEC-134. Moved those to the SAT team list for review.
  • Sri Maldia - need to assign SPEC-170 to her. Waiting for Stephane to return from his vacation.

July 28, 2016

Attendees: Walt, Chris, Sri Maldia - Alps Electronics

Notes:

  • Yury - working on patch for iDrive
  • Michael needs to update SPEC-132
  • Sri explained that Alps is interested in Wifi and Bluetooth and would like to get involved in writing the GUI and connection management software. Walt will put her in touch with Stephane to get the status of Connman and advice on how to get started. There is an existing user interface that Sri found, but it is not connected to Connman.

Jul 7, 2016

Attendees: Walt, Stephane, Jan-Simon, Yury

Notes:

  • Yury - sent log file to Isogai-san to help debug the problem with iDrive commands not getting into Wayland. Since we have not heard anything further from the team in Japan, assume they will work this out during the integration session in Japan on Friday.
  • Need Michael to update SPEC-132 or wiki page with why AMB is no longer considered that appropriate solution for vehicle messaging and what the proposed solution will look like. On vacation this week.

June 30, 2016

Attendees:Walt, Christian, Michael

Notes:

  • Tomorrow morning code Microchip will start putting code into gerrit for the video server, keyboard driver , backported MOST driver, vehicle interface. Done - waiting on merge. Need to decide if the refactoring of the templates and adding meta-agl-extra layer to the build affects where we put this code.
  • Michael shipping hardware to Japan tomorrow including the rear seat displays since Walt has not heard from BD about a ship date for the parts to get to him. Done
  • Jira request for new subfolders will be entered today. Jan-Simon is back in the office tomorrow and should get those set up. Done
  • Need Michael to update SPEC-132 or wiki page with why AMB is no longer considered that appropriate solution for vehicle messaging and what the proposed solution will look like. (After ALS)

June 16, 2016

Attendees:Walt, Stephane, Christian, Michael

Notes:

  • Tomorrow morning code Microchip will start putting code into gerrit for the video server, keyboard driver , backported MOST driver, vehicle interface.
  • Michael shipping hardware to Japan tomorrow including the rear seat displays since Walt has not heard from BD about a ship date for the parts to get to him.
  • Jira request for new subfolders will be entered today. Jan-Simon is back in the office tomorrow and should get those set up.
  • Need Michael to update SPEC-132 or wiki page with why AMB is no longer considered that appropriate solution for vehicle messaging and what the proposed solution will look like.
  • Open Telematics - Imamura-san said that he will update the issue in Jira (SPEC-187) to provide the latest status. Done

June 2, 2016

Attendees: Walt, Stephane, Michael, Christian, Imamura

Notes:

  • At the meeting in Vannes two weeks ago (Microchip/IoT.bzh) they determined that AMB is not the ideal solution for connectivity to the vehicle busses. Tobias (MOST) and Yuri (CAN/LIN) will start working in the next two weeks on the signaling interface. Requested that Michael update SPEC-132 or wiki page with why AMB is no longer considered that appropriate solution for vehicle messaging and what the proposed solution will look like.
  • Network connectivity - moved the GUI part of the project to the ALS demo. Still need to update the requirements spec.
  • Open Telematics - Imamura-san said that he will update the issue in Jira to provide the latest status.

May 19, 2016

Attendees: Walt, Christian, Michael, Stephane

Notes:

  • Signal meeting in Vannes is on-going

May 5, 2016

Attendees: Walt

Meeting canceled after 5 minutes due to Golden Week in Japan and National Holiday in Germany and France.


April 21, 2016

Attendees: Walt,Stephane, Imamura, Tamura, Yamashita, Sosa Rimpei

Notes:

  • Messaging framework plan for Face to face meeting and prototype between IoT.bzh and Microchip. Discussion bled into App FW work done by Jose. IPC connectivity is common ground for both areas.
  • Connman integration started by Jose for TCP/IP Network Manager. See updates in https://jira.automotivelinux.org/browse/SPEC-119

April 6, 2016

Attendees: Walt, Michael, Christian, Stephane, Fulup, Imamura, Tamura, Bai, Yamashita

Notes:

  • Discussed SPEC-155 - Updating section 5.2.11 Automotive Interfaces.
    • Michael asked what we consider the completeness of the section to be. Agreed that the section's requirements and use cases need to be rewritten to be describe the general interface instead of the mix of specific data fields and general information.
    • Take the JSON/YAML work (SPEC-154) being done in GENIVI into account as part of the spec. We do not necessarily need the high data rate use cases.
    • Is AMB the right starting point especially when we take security into account?
  • Discussed proceeding with implementation of a prototype between IoT.bzh and Microchip using an agent structure. The general parameters are for Microchip to provide a number of agents CAN bus properties (both read and write) and IoT.bzh will work on integration with their app framework. Michael will talk to Yuri about how to structure the agents and have a proposal.
  • Face to face meeting in Europe proposed for May (dates TBD)

March 10, 2016

Attendees: Walt, Michael, Stephane, Yamashita (Advanced Telematics), Nakano, Imamura

Notes:

  • Team will review section 5.2.11 for the next meeting. Probably need to add security and privacy requirements.
  • Need to develop use cases for vehicle bus access.
  • Discussed JLR Vehicle Signal Specification and Interface. Will keep an eye on that and determine if it is useful for AGL later. See

http://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-March/001668.html

http://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-March/001686.html

  • Plan would be to use an interface specification of some sort, most likely JSON.

Next meeting will be Thursday Mar 17 1pm UTC


February 24, 2016

Face to Face meeting at the AGL AMM.

Attendees:

  • Fulup Ar Foll (IoT.bzh)
  • Nobuyuki Uchida (Qualcomm)
  • Risto Avila (Qt)
  • Keisuke Nakano (NTT DATA)
  • Hiroto Imamura (NTT DATA)
  • Walt Miner (Linux Foundation)
  • Michael Fabry (Microchip)
  • Soya Saito (Microchip)
  • Christian Gromm (Microchip)

A) Automotive Message Broker (AMB) - Discussion started on how connectivity between Application layer and hardware resources should be established best. Current AMB solution comes at following Pros/Cons:

Pros:

  • Common API makes it way easier for different companies to use it and to decouple applications from hardware buses (Michael)
  • E.g.the AMB plugins written by Yury Asheshov (Microchip) were easily used by JLR's HVAC application (Michael)
  • +1 for AMB (Risto)

Cons:

  • AMB most likely is not going to be accepted in mainstream (Fulup)
  • AMB seems over-engineered (Fulup)
  • Current implemention has issues and need rework especially in terms of security (Risto, Michael)
  • A bus like CAN, must not be allowed to be accessed by every application (Michael)
  • Two-level security approach (Cynara, privileged database at application and context level) (Fulup)
  • Common mistake when designing an API is to define it as a map not as a protocol (Fulup)
  • Proposal is to use json protocol as common API instead of dbus (Fulup)
  • However, the parser needed to decode the Json messages might be too much overhead to be implemented in a small micro (Christian)

Following tasks need to be addressed:

  1. Let's take what is already there (take stuff from Tizen)
  2. Take CES demo and put it in an application framework
  3. Create a common report to find out what is needed to move DEMO applications to a framework (IoT.bzh and MCHP)
  4. Question is cost of adaption, e.g. writing documentation

Timeframe:

  1. Do we need this for next release? (Michael)
  2. Security is not that important for the BB release (Walt)
  3. Need “sexy” demo for July most likely 90% can be reused (Fulup)

Misc:

  1. How big is implementation of security server? How fast is the http server starting up? Boot time is key! (Risto)
  2. Didn't do any measurement on boot time yet (Fulup)
  3. Secure boot is needed and this will slow down boot process (Fulup)

B) Cloud Connectivity- Discussion on how this is intended to work (NTT Data)

C) SDL (Smart Device Link):

  • SDL should not be the center of the AGL architecture (Fulup)
  • First applications where designed on windows, then QNX (Copyright by Ford)
eg-connectivity/meetings.1542293670.txt.gz · Last modified: 2018/11/15 14:54 by waltminer