The Networking and Internet functional unit is all about connecting vehicles to IT Infrastructure and to other vehicles by using wireless network connections over:

• Mobile networks
• WLAN access points.

Wi-Fi class provides list view of available Wi-Fi networks:

• Detailed information view with signal strength
• Security or IP address for Wi-Fi network
• Functionality to connect and disconnect to open and protected Wi-Fi networks
• Connect to hidden Wi-Fi network by providing SSID and passphrase
• Mark and unmark Wi-Fi network for auto-connect
• Enable and disable Wi-Fi tethering with SSID and passphrase entry
• Turn on and off Wi-Fi adapter

This class requires following components:

• Tabs component
  • BoxCaption component
• Settings component
  • BoxCaption component
  • Tabs component
  • Themes component
  • Wifi component
  • Bluetooth component

Also included in this functional unit is the management of voice calls (including telematics), a browser framework for automotive, Ethernet networking in the car, and connection management between various data sources and sinks in the car.

Watch .

Access the .

Download the .

This screen is usually loaded from Settings component and since this component is included in every Tizen PoC application it's available for future use.

The sections below are taken from directions for what is known as the Tizen IVI 3.0-M2-EOY (commonly called 'the Jan. 15 image'. The current Tizen release is dated 2014.01.14, and may require some adjustment.

The following installation directions take the base Tizen image and install needed supporting software

1. The most recent version of the WRT Bluetooth plugin. Clone-able from here: review.tizen.org/profile/ivi/wrt-plugins-ivi-bt.

2. Version 12.1.3750 of the Phone widget. Run wrt-launcher -l to check your version.

Tizen IVI WRT applications are built into widget ('.wgt') files for deployment (a format based on the W3C widget specification, see http://www.w3.org/TR/widgets/ for more information). Once you have built or received the widget files for one or more applications that you wish to deploy and run, the next step is to copy them onto the target device. Common options for this would be tools like scp/sftp (in a Linux/Unix environment), FileZilla (Windows and Mac) or Cyberduck (Mac).

Once the .wgt files have been transferred to the target machine, they may be installed, launched and uninstalled.

To get a list of currently installed applications, use the following command from a terminal (or remote shell/ssh session) on the target hardware (log in as root with the password tizen):

root:~> wrt-launcher -l

This will produce output similar to the following:

If the application you wish to install is not already installed, simply enter (using ODBQpKvkS1.Settings.wgt as an example):

root:~> wrt-installer -i ODBQpKvkS1.Settings.wgt

If successful, you should see output such as the following:

===========================================================
   # wrt-installer #
   # argc [3]
   # argv[0] = [wrt-installer]
   # argv[1] = [-i]
   # argv[2] = [ODBQpKvkS1.Settings.wgt]
   ## wrt-installer : ODBQpKvkS1.Settings.wgt installation was successful.
   ===========================================================

If unsuccessful, you may see errors such as 'invalid widget package', 'privilege level violation' or, if the application is already installed (and its widget file was built with a different signature than the one you wish to install), 'invalid signature'. The first two errors are out of scope for this document.

If you see 'invalid signature', and the widget file has to your knowledge been created with a valid signature, the likely cause is a conflict between the signature of the currently installed version and that of the new version. Though both signatures may be valid, the system treats the upgrade of an existing package with a different signature as a security violation. To work around this issue, simply uninstall the application and subsequently install the new version:

root:~> wrt-installer -un ODBQpKvkS1.Settings.wgt      <-- note: use the App ID when 
un-installing and the full widget filename when installing

If the uninstall is successful, you should see output like the following:

===========================================================
   # wrt-installer #
   # argc [3]
   # argv[0] = [wrt-installer]
   # argv[1] = [-un]
   # argv[2] = [ODBQpKvkS1.Settings.wgt]
   ===========================================================
   ## wrt-installer : ODBQpKvkS1.Settings.wgt un-installation was successful.

Refer to installation instructions above for the subsequent installation steps.

In order to launch and run an installed application, issue the following command with the application's App ID as an argument:

root:~> wrt-launcher -s ODBQpKvkS1.Settings.wgt

You should see the application start and run on the target device.

To launch the application in debug mode, add the '-d' flag:

root:~> wrt-launcher -d -s ODBQpKvkS1.Settings.wgt

This will produce output like the following:

root:~/wgt> wrt-launcher -d -s ODBQpKvkS1.Settings.wgt
   port: 36070
   result: launched

The port number referenced is a random high port which allows one to connect to the target device with a web browser using a URL of the form:

http://&lt;ip address or name of target device>:<port #>

For example:

http://192.168.1.223:36070

Once connected, you should see a single link in the upper right of the resulting web page, e.g.:

file:///opt/usr/apps/ODBQpKvkS1/res/wgt/index.html

Clicking that link will launch Webkit Web Inspector, a set of web development tools that should look familiar to users of Firefox Firebug or Chrome Dev Tools. Click the 'Console' icon in the toolbar to go to the Javascript console. Press ctrl-R, or type:

window.location.reload();

…to reload the application in order to display the startup/initialization functions associated with the app (since the app has already started by the time the debug interface is available).

To exit a running application, issue the following command with the application's App ID as an argument:

root:~> wrt-launcher -k ODBQpKvkS1.Settings

Instruction to the console:

Assumptions these are all running from the Tizen platform and can access the console by SSH command or Control ALT F4 for a terminal. Tizen instructions are at Tizen.org

Install

wrt-installer -i ODBQpKvkS1.Settings.wgt

Launch

wrt-installer -i ODBQpKvkS1.Settings.wgt

• Wi-Fi class provides list view of available Wi-Fi networks:
  • Detailed information view with signal strength
  • Security or IP address for Wi-Fi network
  • Functionality to connect and disconnect to open and protected Wi-Fi networks
  • Connect to hidden Wi-Fi network by providing SSID and passphrase
  • Mark and unmark Wi-Fi network for auto-connect
  • Enable and disable Wi-Fi tethering with SSID and passphrase entry
  • Turn on and off Wi-Fi adapter