Automotive Linux Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== oFono ======

**oFono** provides a mobile telephony ([[https://en.wikipedia.org/wiki/GSM|GSM]]/[[https://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System|UMTS]]) mobile telephony stack.

On AGL Demonstration Platform, it compiles along the [[http://www.bluez.org/|BlueZ]] [[https://en.wikipedia.org/wiki/Bluetooth|Bluetooth]] stack, most notably to provide [[https://developer.bluetooth.org/TechnologyOverview/Pages/HFP.aspx|HFP (Hands-Free Profile)]] functionality.

Project site : [[https://01.org/ofono|https://01.org/ofono]]


----

===== AGL Demonstration Platform =====

AGL Demonstration Platform aims to provide a user-friendly and automated way to pair Bluetooth devices, and make/receive [[http://qwikfix.co.uk/dvla-contact/|phone calls]].

As for now, we can manually achieve this with shell commands (original source from [[https://wiki.tizen.org/wiki/Connecting_to_a_Smartphone_with_Bluetooth_and_Making_Phone_Calls|here]]).


-----

==== Manually pairing a Bluetooth smartphone with shell commands ====

  * Turn on Bluetooth on the smartphone and make it visible for other devices

  * Plug the Bluetooth USB dongle into the device with Tizen:Common

  * Verify that the Bluetooth USB dongle is detected :
<code>hciconfig -a</code>

  * Bring up the Bluetooth USB dongle :
<code>rfkill unblock bluetooth
hciconfig hci0 up</code>

  * Power on the Bluetooth controller :
<code>[bluetooth]# power on</code>

  * Enable the agent and set it as default :
<code>[bluetooth]# agent on
[bluetooth]# default-agent</code>

  * Set the Bluetooth controller as discoverable for 3 minutes and pairable :
<code>[bluetooth]# discoverable on
[bluetooth]# pairable on</code>

  * Scan for other device to retrieve the smartphone :
<code>[bluetooth]# scan on</code>

  * Find out the MAC address of the smartphone :
<code>[bluetooth]# devices</code>

  * Pair with the smartphone :
<code>bluetooth]# pair smartphone_mac_address</code>

  * Enter 4 digit PIN if prompted. Enter the same PIN on the smartphone :
<code>agent]PIN code: ####</code>

  * Allow the service authorization if requested :
<code>[agent]Authorize service service_uuid (yes/no): yes</code>

  * Trust the smartphone :
<code>[bluetooth]# trust smartphone_mac_address</code>

  * Connect to the smartphone : 
<code>[bluetooth]# connect smarphone_mac_address</code>

  * Verify that the smartphone is successfully connected and display information about it with the following command :
<code>bluetooth]# info smarphone_mac_address</code>

  * The device has been successfully paired with the smartphone and you can now exit bluetoothctl :
<code>[bluetooth]# quit</code>
Automotive Linux Wiki

User Tools

Site Tools

Page Tools
