User Tools

Site Tools


eg-connectivity:meetings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
eg-connectivity:meetings [2018/08/22 21:51]
waltminer
eg-connectivity:meetings [2019/02/21 14:33]
waltminer
Line 5: Line 5:
 Conference Information:​ Conference Information:​
  
-1Join https://​global.gotomeeting.com/​join/​254629557+Please join my meeting from your computer, tablet or smartphone 
 +https://​global.gotomeeting.com/​join/​254629557 ​
  
-2. Use your microphone and speakers (VoIP) - a headset is recommended. ​ Or, call in using your telephone+You can also dial in using your phone
  
-| Australia: +61 2 9091 7603           | Italy: +39 0 699 26 68 65                  | 
-| Austria: +43 (0) 7 2088 0716         | Japan (toll-free):​ 0 120 242 200           | 
-| Belgium: +32 (0) 28 08 4372          | Netherlands:​ +31 (0) 208 080 759           | 
-| Canada: +1 (647) 497-9380 ​           | New Zealand: +64 9 974 9579                | 
-| Canada (toll-free):​ 1 877 777 3281   | Norway: +47 21 04 30 59                    | 
-| Denmark: +45 (0) 69 91 84 58         | Spain: +34 931 76 1534                     | 
-| Finland: +358 (0) 931 58 1773        | Sweden: +46 (0) 852 500 691                | 
-| France: +33 (0) 170 950 590          | Switzerland:​ +41 (0) 435 0026 89           | 
-| Germany: +49 (0) 692 5736 7300       | United Kingdom: +44 (0) 20 3713 5011       | 
-| India (toll-free):​ 000 800 100 8227  | United States (toll-free):​ 1 877 309 2070  | 
-| Ireland: +353 (0) 15 360 756         | United States: +1 (312) 757-3119 ​          | 
  
-Access Code: 254-629-557\\ +Access Code: 254-629-557 ​
-Audio PIN: Shown after joining the meeting+
  
-Meeting ID254-629-557+| Australia+61 2 9091 7603               | Austria: +43 7 2088 0716                   | 
 +| Belgium: +32 28 08 4372                    | Canada (Toll Free): 1 877 777 3281         | 
 +| Canada: +1 (647) 497-9380                  | Denmark: +45 69 91 84 58                   | 
 +| Finland: +358 931 58 1773                  | France: +33 170 950 590                    | 
 +| Germany: +49 692 5736 7300                 | India (Toll Free): 18002669775 ​            | 
 +| Ireland: +353 15 360 756                   | Italy: +39 0 699 26 68 65                  | 
 +| Japan (Toll Free): 0 120 242 200           | Korea, Republic of (Toll Free): 0806180880 | 
 +| Netherlands:​ +31 208 080 759               | New Zealand: +64 9 974 9579                | 
 +| Norway: +47 21 04 30 59                    | Spain: +34 931 76 1534                     | 
 +| Sweden: +46 852 500 691                    | Switzerland:​ +41 435 0026 89               | 
 +| United Kingdom: +44 20 3713 5011           | United States (Toll Free): 1 877 309 2070  | 
 +| United States: +1 (312) 757-3119           ​| ​                                           |
  
 +
 +Joining from a video-conferencing room or system? ​
 +Dial: 67.217.95.2##​254629557 ​
 +Cisco devices: 254629557@67.217.95.2 ​
 +
 +First GoToMeeting?​ Let's do a quick system check: ​
 +https://​link.gotomeeting.com/​system-check ​
 ------- -------
 +
 +==== February 21, 2019 ====
 +Attendees: Walt, Jan-Simon, Sebastien, Scott, Romain, Kusakabe, Michael
 +
 +Roadmap for 2019 
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * 1/24
 +         * CANFD completed and added in gerrit for GG.
 +         * Plans for HH
 +           * Adding multiframe capability ​
 +           * Reference CAN message set
 +           * J1939 support
 +           * Signal composer improvements TBD 
 +           * Messaging sending optimizations - one shot versus constant messages
 +       * 2/7 
 +         * Walt spoke to Paul Thieme of Purdue University who is working on agriculture projects and they are interested promoting AGL for ISO 11783 based on J1939 and displaying data to farm tractor operators. ​
 +         * J1939 implementation is currently in development. Relies on multi-frame support for CAN. Investigating whether this can be completed for HH. 
 +         * Discussed how to send CAN data using the Signal Composer and Low Level CAN binding. Walt will create a JIRA ticket to document the use cases. ​
 +         * Kusakabe talked about how Denso-Ten will make additional use of the Signal Composer and Low Level CAN binding this year in their work on AGL. 
 +       * 2/21 
 +         * J1939 support underway. Will support J1939 multi-frame use case. General multi-frame can wait for additional requirements from OEMs or other protocols.
 +
 +
 +   * Bluetooth and Wifi Updates
 +     * 2/7 - rewrite of the bindings is complete
 +     * 2/21 - New conmann being backported by Matt to fix the excessive scanning issues. ​
 +  ​
 +   * NFC - Use of NFC for user identification. ​
 +     * 1/24 - Reading the cards is ok. Still some issues with writing the tags with neard. Close to finishing this off once Scott get her the latest Identity agent changes. ​
 +     * 2/7 - Raquel has the latest identity agent changes from Scott and fixing open issues.  ​
 +     * 2/21 - Identity agent changes tested and submitted to gerrit. ​
 +
 +   * Instrument Cluster ​
 +     * Nothing to report. Some minor issues to fix with GG on the back burner due to thud uprev. ​
 +
 +   * Telematics reference device using built in modem support
 +     * Minimal image being tested
 +
 +New Business:
 +
 +
 +==== February 7, 2019 ====
 +Attendees: Walt, Jan-Simon, Sebastien, Scott, Romain, Kusakabe
 +
 +Roadmap for 2019 
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +     * 11/1 
 +       * No update
 +     * 11/15
 +       * No update
 +     * 12/13
 +       * Romain pushed CANFD capability to the low level CAN binder. See https://​gerrit.automotivelinux.org/​gerrit/#/​q/​status:​open+project:​apps/​agl-service-can-low-level+branch:​master+topic:​canfd
 +     * 1/24
 +         * CANFD completed and added in gerrit for GG.
 +         * Plans for HH
 +           * Adding multiframe capability ​
 +           * Reference CAN message set
 +           * J1939 support
 +           * Signal composer improvements TBD 
 +           * Messaging sending optimizations - one shot versus constant messages
 +       * 2/7 
 +         * Walt spoke to Paul Thieme of Purdue University who is working on agriculture projects and they are interested promoting AGL for ISO 11783 based on J1939 and displaying data to farm tractor operators. ​
 +         * J1939 implementation is currently in development. Relies on multi-frame support for CAN. Investigating whether this can be completed for HH. 
 +         * Discussed how to send CAN data using the Signal Composer and Low Level CAN binding. Walt will create a JIRA ticket to document the use cases. ​
 +         * Kusakabe talked about how Denso-Ten will make additional use of the Signal Composer and Low Level CAN binding this year in their work on AGL. 
 +
 +
 +   * Bluetooth and Wifi Updates
 +     * 2/7 - rewrite of the bindings is complete
 +  ​
 +   * NFC - Use of NFC for user identification. ​
 +     * 1/24 - Reading the cards is ok. Still some issues with writing the tags with neard. Close to finishing this off once Scott get her the latest Identity agent changes. ​
 +     * 2/7 - Raquel has the latest identity agent changes from Scott and fixing open issues.  ​
 + 
 +New Business:
 +     * Telematics reference device using built in modem support
 +       * Newer version of ofono required (1.25 being tested) than we have in FF or GG. 
 +
 +
 +==== January 13 and 24, 2019 ====
 +Attendees: Walt, Jan-Simon, Sebastien, Michael, Romain, Chris, Scott
 +
 +Roadmap for 2019 
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +     * 11/1 
 +       * No update
 +     * 11/15
 +       * No update
 +     * 12/13
 +       * Romain pushed CANFD capability to the low level CAN binder. See https://​gerrit.automotivelinux.org/​gerrit/#/​q/​status:​open+project:​apps/​agl-service-can-low-level+branch:​master+topic:​canfd
 +       * 1/24
 +         * CANFD completed and added in gerrit for GG.
 +         * Plans for HH
 +           * Adding multiframe capability ​
 +           * Reference CAN message set
 +           * J1939 support
 +           * Signal composer improvements TBD 
 +           * Messaging sending optimizations - one shot versus constant messages
 +
 +   * Bluetooth and Wifi Updates
 +     * Dependent on network connectivity update below. ​
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated. ​
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
 +     * 9/6 - Bluetooth binding still in progress
 +     * 11/1 
 +       * Need to follow-up on https://​jira.automotivelinux.org/​browse/​SPEC-1801
 +     * 11/15
 +       * Matt R's rewrite of Bluetooth binding progressing. Stoyan will test the latest batch of patches merged in gerrit. Then these will be backported to FF. 
 +     * 11/29 - Bluetooth binding rewrite being tested in Karlsruhe this week on FF as well as master. Looks good so far. 
 +
 +   * NFC - Use of NFC for user identification. ​
 +     * On-hold
 +     * 6/14 
 +       * Matt R started digging into
 +     * 6/28 
 +       * Matt R still working on
 +     * 7/12 
 +       * Matt R cranking along. ​
 +     * 7/26
 +       * No update
 +     * 8/23 
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R. 
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037
 +     * 9/6 - SPEC-1683 resolved. ​
 +     * 11/1 had issues in Dresden with service (fixed by https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17249/​ )
 +     * 11/15 - Raquel removed libnfc dependency and has a good handle on how to finish it off. Should be ready for Karlsruhe. ​
 +     * 11/29 - Raquel'​s changes look good in testing. Need to get a handle on programming tags to match the identity in the current tags. Loic is getting the schema to enable local identity handling without requiring going to the Forgerock server. ​
 +     * 12/13 - Raquel'​s changes available. Programming the cards is a little wonky. ​
 +     * 1/24 - Reading the cards is ok. Still some issues with writing the tags with neard. Close to finishing this off once Scott get her the latest Identity agent changes. ​
 + 
 +New Business:
 +     * Telematics reference device using built in modem support
 +       * Newer version of ofono required (1.25 being tested) than we have in FF or GG. 
 +
 +
 +==== December 13, 2018 ====
 +Attendees: Walt, Jan-Simon, Sebastien, Michael, Romain
 +
 +   * HVAC actuator in green machine #1 (from Japan) is not working correctly. Discussed debug possibilities. Michael confirmed that both demo units have updated hardware and firmware. Will create a video and share with Michael. ​
 +   * No Bluetooth audio on flounder or master. Need help from Thierry. Sent him an email asking for support at 6 pm. 
 +
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +     * 11/1 
 +       * No update
 +     * 11/15
 +       * No update
 +     * 12/13
 +       * Romain pushed CANFD capability to the low level CAN binder. See https://​gerrit.automotivelinux.org/​gerrit/#/​q/​status:​open+project:​apps/​agl-service-can-low-level+branch:​master+topic:​canfd
 +       * 1/24
 +         * CANFD completed and added in gerrit for GG.
 +         * Plans for HH
 +           * Adding multiframe capability ​
 +           * Reference CAN message set
 +           * J1939 support
 +           * Signal composer improvements TBD 
 +           * Messaging sending optimizations - one shot versus constant messages
 +
 +   * Bluetooth and Wifi Updates
 +     * Dependent on network connectivity update below. ​
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated. ​
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
 +     * 9/6 - Bluetooth binding still in progress
 +     * 11/1 
 +       * Need to follow-up on https://​jira.automotivelinux.org/​browse/​SPEC-1801
 +     * 11/15
 +       * Matt R's rewrite of Bluetooth binding progressing. Stoyan will test the latest batch of patches merged in gerrit. Then these will be backported to FF. 
 +     * 11/29 - Bluetooth binding rewrite being tested in Karlsruhe this week on FF as well as master. Looks good so far. 
 +
 +   * NFC - Use of NFC for user identification. ​
 +     * On-hold
 +     * 6/14 
 +       * Matt R started digging into
 +     * 6/28 
 +       * Matt R still working on
 +     * 7/12 
 +       * Matt R cranking along. ​
 +     * 7/26
 +       * No update
 +     * 8/23 
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R. 
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037
 +     * 9/6 - SPEC-1683 resolved. ​
 +     * 11/1 had issues in Dresden with service (fixed by https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17249/​ )
 +     * 11/15 - Raquel removed libnfc dependency and has a good handle on how to finish it off. Should be ready for Karlsruhe. ​
 +     * 11/29 - Raquel'​s changes look good in testing. Need to get a handle on programming tags to match the identity in the current tags. Loic is getting the schema to enable local identity handling without requiring going to the Forgerock server. ​
 +     * 12/13 - Raquel'​s changes available. Programming the cards is a little wonky. ​
 +     * 1/24 - Reading the cards is ok. Still some issues with writing the tags with neard. Close to finishing this off once Scott get her the latest Identity agent changes. ​
 + 
 +New Business:
 +     * Telematics reference device using built in modem support
 +       * Newer version of ofono required (1.25 being tested) than we have in FF or GG. 
 +
 +
 +
 +==== November 29, 2018 ====
 +Attendees: Walt, Jan-Simon, Scott, Matt R, Sebastien, Romain
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +     * 11/1 
 +       * No update
 +     * 11/15
 +       * No update
 +
 +   * Bluetooth and Wifi Updates
 +     * Dependent on network connectivity update below. ​
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated. ​
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
 +     * 9/6 - Bluetooth binding still in progress
 +     * 11/1 
 +       * Need to follow-up on https://​jira.automotivelinux.org/​browse/​SPEC-1801
 +     * 11/15
 +       * Matt R's rewrite of Bluetooth binding progressing. Stoyan will test the latest batch of patches merged in gerrit. Then these will be backported to FF. 
 +     * 11/29 - Bluetooth binding rewrite being tested in Karlsruhe this week on FF as well as master. Looks good so far. 
 +
 +   * NFC - Use of NFC for user identification. ​
 +     * On-hold
 +     * 6/14 
 +       * Matt R started digging into
 +     * 6/28 
 +       * Matt R still working on
 +     * 7/12 
 +       * Matt R cranking along. ​
 +     * 7/26
 +       * No update
 +     * 8/23 
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R. 
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037
 +     * 9/6 - SPEC-1683 resolved. ​
 +     * 11/1 had issues in Dresden with service (fixed by https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17249/​ )
 +     * 11/15 - Raquel removed libnfc dependency and has a good handle on how to finish it off. Should be ready for Karlsruhe. ​
 +     * 11/29 - Raquel'​s changes look good in testing. Need to get a handle on programming tags to match the identity in the current tags. Loic is getting the schema to enable local identity handling without requiring going to the Forgerock server. ​
 + 
 +New Business:
 +     * Setting time on the M3 issue - Jan-Simon got an RTC working with KF+M3
 +
 +     * Got an update from Scott on the work for the IC reference. ​
 +
 +
 +==== November 15, 2018 ====
 +Attendees: Walt, Jan-Simon, Scott, Kusakabe, Romain, Michael, Chris
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +     * 11/1 
 +       * No update
 +     * 11/15
 +       * No update
 +
 +   * Bluetooth and Wifi Updates
 +     * Dependent on network connectivity update below. ​
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated. ​
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
 +     * 9/6 - Bluetooth binding still in progress
 +     * 11/1 
 +       * Need to follow-up on https://​jira.automotivelinux.org/​browse/​SPEC-1801
 +     * 11/15
 +       * Matt R's rewrite of Bluetooth binding progressing. Stoyan will test the latest batch of patches merged in gerrit. Then these will be backported to FF. 
 +
 +   * NFC - Use of NFC for user identification. ​
 +     * On-hold
 +     * 6/14 
 +       * Matt R started digging into
 +     * 6/28 
 +       * Matt R still working on
 +     * 7/12 
 +       * Matt R cranking along. ​
 +     * 7/26
 +       * No update
 +     * 8/23 
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R. 
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037
 +     * 9/6 - SPEC-1683 resolved. ​
 +     * 11/1 had issues in Dresden with service (fixed by https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17249/​ )
 +     * 11/15 - Raquel removed libnfc dependency and has a good handle on how to finish it off. Should be ready for Karlsruhe. ​
 + 
 +   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel. ​
 +     * 7/26 - No update
 +
 +   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware. ​
 +     * 6/28 
 +       * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
 +       * Next will look at haptic devices.
 +     * 7/12
 +       * No updates
 +     * 7/26
 +       * New lin kernel module pending for rc3
 +     * 11/1 
 +       * Pending in gerrit: https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17615/​
 +       * Todo: systemd unit and hvac app can device rename
 +     * 11/15
 +       * Done
 +
 +New Business:
 +     * Setting time on the M3 issue
 +     * Got an update from Scott on the work for the IC reference. ​
 +
 +==== November 1, 2018 ====
 +Attendees: Jan-Simon, Tom
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +     * 11/1 
 +       * No update
 +
 +   * Bluetooth and Wifi Updates
 +     * Dependent on network connectivity update below. ​
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated. ​
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
 +     * 9/6 - Bluetooth binding still in progress
 +     * 11/1 
 +       * Need to follow-up on https://​jira.automotivelinux.org/​browse/​SPEC-1801
 +
 +   * NFC - Use of NFC for user identification. ​
 +     * On-hold
 +     * 6/14 
 +       * Matt R started digging into
 +     * 6/28 
 +       * Matt R still working on
 +     * 7/12 
 +       * Matt R cranking along. ​
 +     * 7/26
 +       * No update
 +     * 8/23 
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R. 
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037
 +     * 9/6 - SPEC-1683 resolved. ​
 +     * 11/1 had issues in Dresden with service (fixed by https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17249/​ )
 + 
 +   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel. ​
 +     * 7/26 - No update
 +
 +   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware. ​
 +     * 6/28 
 +       * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
 +       * Next will look at haptic devices.
 +     * 7/12
 +       * No updates
 +     * 7/26
 +       * New lin kernel module pending for rc3
 +     * 11/1 
 +       * Pending in gerrit: https://​gerrit.automotivelinux.org/​gerrit/#/​c/​17615/​
 +       * Todo: systemd unit and hvac app can device rename
 +
 +New Business:
 +     ​* ​
 +
 +
 +
 +==== October 18, 2018 ====
 +Canceled due to Dresden AMM
 +
 +==== October 4, 2018 ====
 +Attendees: Walt, Jan-Simon, Romain, Scott, Stephane, Michael
 +
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
 +  ​
 +   * Vehicle Signaling
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service)
 +     * Run-time creation of virtual messages has been added to master
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section.  ​
 +     * 6/28
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
 +       * Low-level CAN tests to be pushed today.  ​
 +     * 7/12
 +       * Reviewed roadmap and updated
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements. ​
 +       * FF effort is now testing and bug-fixing
 +     * 7/26
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
 +       * Improvement on metadata handling
 +     * 8/9 
 +       * Performance issue considered closed. ​
 +       * Metadata handling improvement considered closed
 +       * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG
 +     * 9/6
 +       * Not much to update ​
 +     * 9/20 
 +       * No Update
 +     * 10/4
 +      * adapting low-level CAN binder to handle CAN FD frames. ​
 +      * Test cases are complete for low level CAN binder and Signal Composer
 +
 +   * Bluetooth and Wifi Updates
 +     * Dependent on network connectivity update below. ​
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated. ​
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
 +     * 9/6 - Bluetooth binding still in progress
 +
 +
 +   * NFC - Use of NFC for user identification. ​
 +     * On-hold
 +     * 6/14 
 +       * Matt R started digging into
 +     * 6/28 
 +       * Matt R still working on
 +     * 7/12 
 +       * Matt R cranking along. ​
 +     * 7/26
 +       * No update
 +     * 8/23 
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R. 
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037
 +     * 9/6 - SPEC-1683 resolved. ​
 + 
 +   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel. ​
 +     * 7/26 - No update
 +
 +   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware. ​
 +     * 6/28 
 +       * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
 +       * Next will look at haptic devices.
 +     * 7/12
 +       * No updates
 +     * 7/26
 +       * New lin kernel module pending for rc3
 +
 +New Business:
 +
 +
 ==== September ​ 20, 2018 ==== ==== September ​ 20, 2018 ====
-Attendees: //Upcoming Meeting//+Attendees: Walt, Jan-Simon, Scott 
 + 
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG 
 +   
 +   * Vehicle Signaling 
 +     * High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service) 
 +     * Run-time creation of virtual messages has been added to master 
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section. ​  
 +     * 6/28 
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2. 
 +       * Low-level CAN tests to be pushed today. ​  
 +     * 7/12 
 +       * Reviewed roadmap and updated 
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.  
 +       * FF effort is now testing and bug-fixing 
 +     * 7/26 
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine 
 +       * Improvement on metadata handling 
 +     * 8/9  
 +       * Performance issue considered closed.  
 +       * Metadata handling improvement considered closed 
 +       * Signal composer unit test coverage improvements in progress.  
 +     * 8/23 
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.  
 +       * Bug fixes from unit test output will be next task. 
 +       * J1939 investigation and V2C metric collection planned for GG 
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON 
 +       * Conversion to API V3 in progress for GG 
 +     * 9/6 
 +       * Not much to update  
 +     * 9/20  
 +       * No Update 
 + 
 +   * Bluetooth and Wifi Updates 
 +     * Dependent on network connectivity update below.  
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.  
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.  
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542 
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.  
 +     * 9/6 - Bluetooth binding still in progress 
 + 
 + 
 +   * NFC - Use of NFC for user identification.  
 +     * On-hold 
 +     * 6/14  
 +       * Matt R started digging into 
 +     * 6/28  
 +       * Matt R still working on 
 +     * 7/12  
 +       * Matt R cranking along.  
 +     * 7/26 
 +       * No update 
 +     * 8/23  
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R.  
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037 
 +     * 9/6 - SPEC-1683 resolved.  
 +  
 +   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.  
 +     * 7/26 - No update 
 + 
 +   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.  
 +     * 6/28  
 +       * Kusakabe pushing new LIN kernel module and HVAC application into master next week. 
 +       * Next will look at haptic devices. 
 +     * 7/12 
 +       * No updates 
 +     * 7/26 
 +       * New lin kernel module pending for rc3 
 + 
 +New Business: 
  
 ==== September 6, 2018 ==== ==== September 6, 2018 ====
-Attendees: //Upcoming Meeting//+Attendees: Walt, Matt, Sebastien, Romain 
 + 
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG 
 +   
 +   * Vehicle Signaling 
 +     * High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service) 
 +     * Run-time creation of virtual messages has been added to master 
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section. ​  
 +     * 6/28 
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2. 
 +       * Low-level CAN tests to be pushed today. ​  
 +     * 7/12 
 +       * Reviewed roadmap and updated 
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.  
 +       * FF effort is now testing and bug-fixing 
 +     * 7/26 
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine 
 +       * Improvement on metadata handling 
 +     * 8/9  
 +       * Performance issue considered closed.  
 +       * Metadata handling improvement considered closed 
 +       * Signal composer unit test coverage improvements in progress.  
 +     * 8/23 
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.  
 +       * Bug fixes from unit test output will be next task. 
 +       * J1939 investigation and V2C metric collection planned for GG 
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON 
 +       * Conversion to API V3 in progress for GG 
 +     * 9/6 
 +       * Not much to update  
 + 
 +   * Bluetooth and Wifi Updates 
 +     * Dependent on network connectivity update below.  
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.  
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.  
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542 
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.  
 +     * 9/6 - Bluetooth binding still in progress 
 + 
 + 
 +   * NFC - Use of NFC for user identification.  
 +     * On-hold 
 +     * 6/14  
 +       * Matt R started digging into 
 +     * 6/28  
 +       * Matt R still working on 
 +     * 7/12  
 +       * Matt R cranking along.  
 +     * 7/26 
 +       * No update 
 +     * 8/23  
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R.  
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037 
 +     * 9/6 - SPEC-1683 resolved.  
 +  
 +   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.  
 +     * 7/26 - No update 
 + 
 +   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.  
 +     * 6/28  
 +       * Kusakabe pushing new LIN kernel module and HVAC application into master next week. 
 +       * Next will look at haptic devices. 
 +     * 7/12 
 +       * No updates 
 +     * 7/26 
 +       * New lin kernel module pending for rc3 
 + 
 +New Business: 
 + 
 + 
 +==== September 6, 2018 ==== 
 +Attendees: Walt, Matt, Sebastien, Romain 
 + 
 +   * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG 
 +   
 +   * Vehicle Signaling 
 +     * High Level ViWi Service available on github (https://​github.com/​iotbzh/​high-level-viwi-service) 
 +     * Run-time creation of virtual messages has been added to master 
 +       * Documentation at http://​docs.automotivelinux.org/​docs/​apis_services/​en/​dev/​reference/​signaling/​signal-composer-api.html. See "​AddObjects"​ section. ​  
 +     * 6/28 
 +       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2. 
 +       * Low-level CAN tests to be pushed today. ​  
 +     * 7/12 
 +       * Reviewed roadmap and updated 
 +       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.  
 +       * FF effort is now testing and bug-fixing 
 +     * 7/26 
 +       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine 
 +       * Improvement on metadata handling 
 +     * 8/9  
 +       * Performance issue considered closed.  
 +       * Metadata handling improvement considered closed 
 +       * Signal composer unit test coverage improvements in progress.  
 +     * 8/23 
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release.  
 +       * Bug fixes from unit test output will be next task. 
 +       * J1939 investigation and V2C metric collection planned for GG 
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON 
 +       * Conversion to API V3 in progress for GG 
 +     * 9/6 
 +       * Not much to update  
 + 
 +   * Bluetooth and Wifi Updates 
 +     * Dependent on network connectivity update below.  
 +     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.  
 +     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.  
 +     * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542 
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG.  
 +     * 9/6 - Bluetooth binding still in progress 
 + 
 + 
 +   * NFC - Use of NFC for user identification.  
 +     * On-hold 
 +     * 6/14  
 +       * Matt R started digging into 
 +     * 6/28  
 +       * Matt R still working on 
 +     * 7/12  
 +       * Matt R cranking along.  
 +     * 7/26 
 +       * No update 
 +     * 8/23  
 +       * On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware is present. Need to fail "​gracefully"​. SPEC-1683 assigned to Matt R.  
 +       * http://​lava.baylibre.com:​10080/​scheduler/​job/​37897#​L3037 
 +     * 9/6 - SPEC-1683 resolved.  
 +  
 +   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.  
 +     * 7/26 - No update 
 + 
 +   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.  
 +     * 6/28  
 +       * Kusakabe pushing new LIN kernel module and HVAC application into master next week. 
 +       * Next will look at haptic devices. 
 +     * 7/12 
 +       * No updates 
 +     * 7/26 
 +       * New lin kernel module pending for rc3 
 + 
 +New Business:
  
  
 ==== August 23, 2018 ==== ==== August 23, 2018 ====
-Attendees: ​//Upcoming Meeting//+Attendees: ​Walt, Jan-Simon, Romain, Matt, Sebastien
  
    * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG    * Review [[:​agl-roadmap#​from_connectivity_eg|2018 Roadmap]] for Connectivity EG
Line 57: Line 905:
        * Metadata handling improvement considered closed        * Metadata handling improvement considered closed
        * Signal composer unit test coverage improvements in progress. ​        * Signal composer unit test coverage improvements in progress. ​
 +     * 8/23
 +       * Signal composer and low-level CAN binder unit test cases were merged today. Still a little bit of integration for FF, but it should be ready for the release. ​
 +       * Bug fixes from unit test output will be next task.
 +       * J1939 investigation and V2C metric collection planned for GG
 +       * Tool in progress to convert from Vektor CAN files to OpenXC/ JSON
 +       * Conversion to API V3 in progress for GG 
  
    * Bluetooth and Wifi Updates    * Bluetooth and Wifi Updates
Line 63: Line 917:
      * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​      * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding. ​
      * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542      * 7/26 - network binding in gerrit/​merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
 +     * 8/23 - all of the wifi updates are in and the old wifi binding has been removed. Bluetooth rewrite based on the network binding lessons learned in progress for GG. 
  
    * Telephony Updates    * Telephony Updates
Line 79: Line 934:
      * 7/26      * 7/26
        * No update        * No update
- +     8/23  
- +       ​On hold. Jan-Simon noted that the systemd units for NFC are failing when no NFC hardware ​is presentNeed to fail "​gracefully"​. Need a Jira ticket ​and will assign Matt R.  
-   General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching +       ​http://lava.baylibre.com:10080/scheduler/job/37897#L3037
-     ​SPEC-1274 - In progress +
-     * 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks. +
-     * 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.  +
-     * 5/3 - Sandbox ​is functionally complete and Pantellis has started integrating with libqtappfw ​Should push sandbox ​to master so we can more widely review ​and test itWill add issues as subtasks for the continuing work.  ​ +
-     ​5/17 - Still in-flightPantellis is somewhat blocked by Matt's workLooks like RC2. +
-     * 5/31 - WIP for RC2. +
-     * 6/14 - On track for RC2 +
-     * 6/28 - Still on track RC2 +
-     * 7/12 - See above +
-     * 7/26 - All merged for rc2 +
- +
    
    * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel. ​    * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel. ​
      * 7/26 - No update      * 7/26 - No update
- 
-   * Discussed test methodology and packaging for CIAT tests. ​ Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited. ​ 
-     * Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw. 
-     * 7/12 
-       * Discussed using Yocto ptests as method for calling and packaging tests 
-         * https://​wiki.yoctoproject.org/​wiki/​Ptest 
-         * http://​git.yoctoproject.org/​cgit/​cgit.cgi/​poky/​tree/​meta/​recipes-support/​attr/​files/​run-ptest 
  
    * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware. ​    * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware. ​
eg-connectivity/meetings.txt · Last modified: 2023/03/22 13:10 by wminer