Differences

This shows you the differences between two versions of the page.

--- eg-connectivity:meetings [2018/07/11 21:50]
waltminer
+++ eg-connectivity:meetings [2018/08/22 21:51]
waltminer
@@ Line 27: / Line 27: @@
 -------
+==== September  20, 2018 ====
-==== August 9, 2018 ====
 Attendees: //Upcoming Meeting//
+==== September 6, 2018 ====
-==== July 26, 2018 ====
 Attendees: //Upcoming Meeting//
-==== July 12, 2018 ====
+==== August 23, 2018 ====
 Attendees: //Upcoming Meeting//
@@ Line 44: / Line 42: @@
      * High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
      * Run-time creation of virtual messages has been added to master
        * Documentation at http://docs.automotivelinux.org/docs/apis_services/en/dev/reference/signaling/signal-composer-api.html. See "AddObjects" section.
-     * 3/22
+     * 6/28
-       * SPEC-1339 - Jonathan working on stabilization of low level CAN binding - merged in gerrit
+       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
-       * SPEC-1347 - Adding "EngineOn" to low level CAN binding
+       * Low-level CAN tests to be pushed today.
-       * New binding in progress to store metrics on vehicle bus. Could be used for supervision, remote diagnostics or black box use cases.
+     * 7/12
-       * SPEC-1344 - Check with Jan-Simon
+       * Reviewed roadmap and updated
-     * 4/5
+       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
-       * SPEC-1344 - Done
+       * FF effort is now testing and bug-fixing
-       * SPEC-1347 - Jonathan almost finished.
+     * 7/26
-       * SPEC-1381 - Next up for Jonathan - Adding vehicle message dictionaries to low-level CAN
+       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
-       * Test cases - Start with CAN low-level services.
+       * Improvement on metadata handling
-     * 4/19
+     * 8/9
-       * Discussions with Oliver Hartkopp went well last week in Karlsruhe.
+       * Performance issue considered closed.
-       * Jonathan still chugging along.
+       * Metadata handling improvement considered closed
-       * Romain - add namespace usage based on discussion with Oliver probably after FF. Requires kernel 4.12 or later.
+       * Signal composer unit test coverage improvements in progress.
-     * 5/3
-       * SPEC-1419 - Romain working on changing the signal composer to a more flexible meta-data storage model. Need Jira ticket.
+   * Bluetooth and Wifi Updates
-       * Jonathan working on testing the low level CAN. See discussion below about creating reusable test plans.
+     * Dependent on network connectivity update below.
-     * 5/17
+     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
-       * SPEC-1419 - Will not be available until the end of June. Romain on vacation the next three weeks.
+     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
-       * SPEC-1407 - Data collection for V2C use cases. Most likely a demo for AMM and targeted for Grumpy Guppy.
+     * 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
-       * Jonathan continuing with test plans and procedures for low-level CAN. (Need Jira)
-     * 5/31
+   * Telephony Updates
-       * Progress on signal-composer using openxc, code on github, to be submitted when Romain is back.
+     * PBAP and Contact app in progress.
-       * SPEC-1419 and SPEC-1407 WIP
+    * 7/12
-       * Jonathan worked on tests for the low-can service, Romain started to integrate these into a test binding (using lua scripts to test low-can).
+       * Done. Need icons. Will submit ticket
-         * https://github.com/iotbzh/afb-test
-         * https://github.com/iotbzh/afb-test/blob/master/conf.d/project/lua.d/low-can-tests.lua
+   * NFC - Use of NFC for user identification.
+     * On-hold
      * 6/14
-       * Signal composer changes will be pushed ASAP by Romain now that he is bacl
+       * Matt R started digging into
-       * Romain working on lua scripts for low level can tests. Should be ready next week.
+     * 6/28
+       * Matt R still working on
+     * 7/12
+       * Matt R cranking along.
+     * 7/26
+       * No update
+   * General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
+     * SPEC-1274 - In progress
+     * 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
+     * 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
+     * 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw.  Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
+     * 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
+     * 5/31 - WIP for RC2.
+     * 6/14 - On track for RC2
+     * 6/28 - Still on track RC2
+     * 7/12 - See above
+     * 7/26 - All merged for rc2
+   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
+     * 7/26 - No update
+   * Discussed test methodology and packaging for CIAT tests.  Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
+     * Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
+     * 7/12
+       * Discussed using Yocto ptests as method for calling and packaging tests
+         * https://wiki.yoctoproject.org/wiki/Ptest
+         * http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-support/attr/files/run-ptest
+   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
+     * 6/28
+       * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
+       * Next will look at haptic devices.
+     * 7/12
+       * No updates
+     * 7/26
+       * New lin kernel module pending for rc3
+New Business:
+==== August 9, 2018 ====
+Attendees: Walt, Michael, Chris, Romain
+   * Review [[:agl-roadmap#from_connectivity_eg|2018 Roadmap]] for Connectivity EG
+   * Vehicle Signaling
+     * High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
+     * Run-time creation of virtual messages has been added to master
+       * Documentation at http://docs.automotivelinux.org/docs/apis_services/en/dev/reference/signaling/signal-composer-api.html. See "AddObjects" section.
      * 6/28
        * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
        * Low-level CAN tests to be pushed today.
+     * 7/12
+       * Reviewed roadmap and updated
+       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
+       * FF effort is now testing and bug-fixing
+     * 7/26
+       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
+       * Improvement on metadata handling
+     * 8/9
+       * Performance issue considered closed.
+       * Metadata handling improvement considered closed
+       * Signal composer unit test coverage improvements in progress.
    * Bluetooth and Wifi Updates
      * Dependent on network connectivity update below.
-     * 4/19 - Matt R. posted patches to rework the Bluetooth settings app
-     * 5/4 - Matt R. still hammering away it. A bunch of patches were merged.
-     * 5/17 - Matt R. back ports to eel have been submitted. Testing these because it looks like there have been some regressions on eel. Not sure if this is related to the backports or something else.
-       * Asynchronous disconnect and reconnect of Bluetooth devices is not being handled correctly by the binding. Matt P. working on fixes for that.
-     * 5/31 - Matt R sent all fixes to Eel. Matt R also tested in 'real life' environment.
-     * 6/14 - Set for ALS on Eel
      * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
+     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
+     * 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
    * Telephony Updates
      * PBAP and Contact app in progress.
-     * 4/5
+    * 7/12
-       * SPEC-1382 - PBAB and Contact App - Binding ready. Integration in progress.
+       * Done. Need icons. Will submit ticket
-     * 4/19
-       * SPEC-1382 - Rewrite of the phone app to include tabs for phone book, missed call lists, etc. in progress. May need some more art work from LF designer.
+   * NFC - Use of NFC for user identification.
-     * 5/3
+     * On-hold
-       * SPEC-1382 - In sandbox and testing. Matt adding some error handling before pushing to master.
-     * 5/17
-       * SPEC-1382 - Matt working through the subtasks listed in the ticket. Coming together for FF RC1.
-     * 5/31
-       * SPEC-1382 - UI related subtasks done, on-track for binding backend for RC1.
      * 6/14
-       * SPEC-1382 - Coming together. First parts submitted. Waiting for repo creation for binding.
+       * Matt R started digging into
      * 6/28
-       * SPEC-1382 - Submitted. Ready for RC1
+       * Matt R still working on
+     * 7/12
+       * Matt R cranking along.
+     * 7/26
+       * No update
+   * General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
+     * SPEC-1274 - In progress
+     * 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
+     * 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
+     * 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw.  Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
+     * 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
+     * 5/31 - WIP for RC2.
+     * 6/14 - On track for RC2
+     * 6/28 - Still on track RC2
+     * 7/12 - See above
+     * 7/26 - All merged for rc2
+   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
+     * 7/26 - No update
+   * Discussed test methodology and packaging for CIAT tests.  Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
+     * Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
+     * 7/12
+       * Discussed using Yocto ptests as method for calling and packaging tests
+         * https://wiki.yoctoproject.org/wiki/Ptest
+         * http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-support/attr/files/run-ptest
+   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
+     * 6/28
+       * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
+       * Next will look at haptic devices.
+     * 7/12
+       * No updates
+     * 7/26
+       * New lin kernel module pending for rc3
+New Business:
+==== July 26, 2018 ====
+Attendees: Jan-Simon, Romain, Christian, Michael,
+   * Review [[:agl-roadmap#from_connectivity_eg|2018 Roadmap]] for Connectivity EG
+   * Vehicle Signaling
+     * High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
+     * Run-time creation of virtual messages has been added to master
+       * Documentation at http://docs.automotivelinux.org/docs/apis_services/en/dev/reference/signaling/signal-composer-api.html. See "AddObjects" section.
+     * 6/28
+       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
+       * Low-level CAN tests to be pushed today.
+     * 7/12
+       * Reviewed roadmap and updated
+       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
+       * FF effort is now testing and bug-fixing
+     * 7/26
+       * Performance issue: Romain could reproduce and fix (down to 5% CPU), Kusakabe-san reported it to be fine
+       * Improvement on metadata handling
+   * Bluetooth and Wifi Updates
+     * Dependent on network connectivity update below.
+     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
+     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
+     * 7/26 - network binding in gerrit/merged and now settings UI being converted over (patches in gerrit) tracked under SPEC-1542
+   * Telephony Updates
+     * PBAP and Contact app in progress.
+    * 7/12
+       * Done. Need icons. Will submit ticket
    * NFC - Use of NFC for user identification.
@@ Line 112: / Line 236: @@
      * 6/28
        * Matt R still working on
+     * 7/12
+       * Matt R cranking along.
+     * 7/26
+       * No update
@@ Line 123: / Line 251: @@
      * 6/14 - On track for RC2
      * 6/28 - Still on track RC2
+     * 7/12 - See above
-   * User profiles to allow authorized users to configure Wifi and BT
+     * 7/26 - All merged for rc2
-   * Support for additional wifi dongles and modes. Currently station mode only. Post-FF.
-   * For 2018 - evaluate usage of connman versus network manager/modem manager for long-term especially for 4G and complex use cases.
    * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
+     * 7/26 - No update
    * Discussed test methodology and packaging for CIAT tests.  Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
      * Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
+     * 7/12
+       * Discussed using Yocto ptests as method for calling and packaging tests
+         * https://wiki.yoctoproject.org/wiki/Ptest
+         * http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-support/attr/files/run-ptest
    * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
-     * 5/17 - Michael working on a replacement to the HVAC firmware. Should be finished next week. Soya is working with Kusakabe in Japan to get this working.
+     * 6/28
-     * 5/31
+       * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
-       * New HVAC firmware done (Michael / MCHP). New hardware/new firmware for HVAC controller board.
+       * Next will look at haptic devices.
-       * Kusakabe-san: Kingfisher + LIN works.
+     * 7/12
+       * No updates
+     * 7/26
+       * New lin kernel module pending for rc3
+New Business:
+  * Wrt: most driver - re-enabled with https://gerrit.automotivelinux.org/gerrit/#/c/15773/1
+==== July 12, 2018 ====
+Attendees: Walt, Jan-Simon, Sebastien, Matt, Romain
+   * Review [[:agl-roadmap#from_connectivity_eg|2018 Roadmap]] for Connectivity EG
+   * Vehicle Signaling
+     * High Level ViWi Service available on github (https://github.com/iotbzh/high-level-viwi-service)
+     * Run-time creation of virtual messages has been added to master
+       * Documentation at http://docs.automotivelinux.org/docs/apis_services/en/dev/reference/signaling/signal-composer-api.html. See "AddObjects" section.
+     * 6/28
+       * Signal composer changes to be pushed today or tomorrow. Will get into FF RC2.
+       * Low-level CAN tests to be pushed today.
+     * 7/12
+       * Reviewed roadmap and updated
+       * Ask Kusakabe to create a JIRA issue based on his ALS 2018 presentation and include the method for reproducing his findings. Use that to document performance improvements.
+       * FF effort is now testing and bug-fixing
+   * Bluetooth and Wifi Updates
+     * Dependent on network connectivity update below.
+     * 6/28 - Matt P. working on wifi binding to update to use generic network service. Wifi binding will be deprecated.
+     * 7/11 - Testing for FF release in progress. Bluetooth Interoperability testing in progress. Finding issues with specific devices. Switch over to new network binding from the old Wifi binding in progress. Switchover will be ready for RC3 including removal of old Wifi binding.
+   * Telephony Updates
+     * PBAP and Contact app in progress.
+    * 7/12
+       * Done. Need icons. Will submit ticket.
+   * NFC - Use of NFC for user identification.
+     * On-hold
      * 6/14
-       * Kusakabe successfully integrated new LIN transceiver into ALS demo.
+       * Matt R started digging into
-       * Microchip successfully integrated new firmware for the HVAC controller board into the ALS demo.
+     * 6/28
+       * Matt R still working on
+     * 7/12
+       * Matt R cranking along.
+   * General network connectivity above connman to manage connectivity including bridging, tethering, network QOS and switching
+     * SPEC-1274 - In progress
+     * 4/5 - Pantellis still working. Initial prototype should be ready in the next two weeks.
+     * 4/19 - Still working on binder and a command line test app. Should be feature complete in next week or so and ready for review.
+     * 5/3 - Sandbox is functionally complete and Pantellis has started integrating with libqtappfw.  Should push sandbox to master so we can more widely review and test it. Will add issues as subtasks for the continuing work.
+     * 5/17 - Still in-flight. Pantellis is somewhat blocked by Matt's work. Looks like RC2.
+     * 5/31 - WIP for RC2.
+     * 6/14 - On track for RC2
+     * 6/28 - Still on track RC2
+     * 7/12 - See above
+   * SafeRide Proposal - Oshri was emailing Oliver H. about getting the code incorporated into kernel.
+   * Discussed test methodology and packaging for CIAT tests.  Schedule a separate a call to discuss with IoT.bzh and Konsulko. Tentatively May 15 after the dev call. Scott, Matt, Matt, Sebastien, Jose, Jonathan should be invited.
+     * Had call on 5/29. Working on Build Types and deployment of wgt(s) within AppFw.
+     * 7/12
+       * Discussed using Yocto ptests as method for calling and packaging tests
+         * https://wiki.yoctoproject.org/wiki/Ptest
+         * http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-support/attr/files/run-ptest
+   * Kusakabe-san is working to replace the Mocca box with a small LIN transceiver but having some problem with the HVAC hardware.
      * 6/28
        * Kusakabe pushing new LIN kernel module and HVAC application into master next week.
        * Next will look at haptic devices.
+     * 7/12
+       * No updates
 New Business:

Automotive Linux Wiki

User Tools

Site Tools

Differences

Page Tools