Differences

This shows you the differences between two versions of the page.

--- dev-call-info [2019/05/07 13:29]
waltminer
+++ dev-call-info [2019/06/10 15:13]
waltminer Agenda for June 11 meeting
@@ Line 14: / Line 14: @@
 ==== Meeting Notes ====
-=== Meeting notes for May 28, 2019 ===
+=== Meeting notes for June 25, 2019 ===
 Attendees: //Upcoming Meeting//
-=== Meeting notes for May 21, 2019 ===
+=== Meeting notes for June 18, 2019 ===
 Attendees: //Upcoming Meeting//
-=== Meeting notes for May 14, 2019 ===
+=== Meeting notes for June 11, 2019 ===
 Attendees: //Upcoming Meeting//
+   * Funky Flounder (flounder branch)
+     * Flounder 6.0.5 - [[agl-distro:release-notes#flounder_605|Release completed!]]
+   * Grumpy Guppy
+     * Guppy 7.0.0 - [[agl-distro:release-notes#grumpy_guppy_700|Release completed!]]
+     * Guppy 7.0.1 - [[agl-distro:release-notes#grumpy_guppy_701|Release completed!]]
+     * Guppy 7.0.2 -  [[agl-distro:release-notes#grumpy_guppy_702|Release completed!]]
+     * Guppy 7.0.3 - Release pushed back to June 30
+       * SPEC-2398 - Scott reported a regression in the IC map viewer (H/T to Witz for finding it) that is new to 7.0.2. Traced to the IVI side.
+       * SPEC-2393 - George seeing crash issue with Pipewire. Possible compiler bug? George tried compiling with Linaro compiler and it looked good.  Eric suggested changing optimization level, saw a similar thing. Investigate 32 bit vs. 64 bit build as a possibility. Konsulko will look at.
+           * Update 5/21 - Tom tested 6.0.5 and 7.0.0 RC1 is fine.  7.0.0 (and 7.0.2) was broken. All use the same version of pokey and meta-raspberrypi
+           * Update 5/28 - Tom waiting for George to test a few things to confirm that we are not confusing separate issue. Otherwise the non-pipewire apps are ok on guppy. George will move his development to master.
+           * Update 6/4 - George reports that the issue is still seen on master after he moved to master.
+       * Renesas <del>BSP 3.15 update pushed to for 7.0.2</del> (Ronan working on)
+         * 4/9 - Merged for master, waiting on guppy (SPEC-2185 and SPEC-2253)
+         * 4/23 - 7.0.2 will continue with BSP 3.9 while we wait for graphics fix. Possible update for 7.0.3.
+         * 5/14 - Stephane/Kurokawa-san - will not switch to 3.15 for guppy. Will wait for 3.19 which will be mid-June.
+         * 5/28 - Still waiting on Cogent layer for 3.19 for guppy.
+         * 6/4 - Still on hold waiting for Cogent.
+   * Happy Halibut - Pre-RC1 released today.
+     * RC1 will merge the Weston 6 sandbox, then test and build by the end of the week. Release is planned for 5/31.
+     * Stoyan reporting issue with mixing streams between local media and Bluetooth on M3.
+     * Once he switches to local media he loses BT for good on all boards.
+     * Bluetooth button is not active on any board.
+     * Weston 6.0 merged for RC1.
+     * SPEC-2468 - Issue reported with Gechic attached to M3.
+     * Daniel reported an issue with QEMU window manager startup that he is looking at.
+     * Re-enable i.MX6 builds
+       * Probably will not re-enable for SABRE auto in guppy, but will do so in Halibut
+       * 5/21 - Scott investigating using open source graphics.
+       * 5/28 - Looking at i.Mx6 and asked about kernel configuration options and what is needed to run app framework. We do not seem to have a standard set of config options.
+         * Is what Tom stated about a standard config file documented somewhere?  Scott will workout how to get the i.Mx6 kernel running and then update the documentation.
+       * 6/4 - Scott went down a rabbit hole and babbled about things for a few minutes... Will push changes to make the i.Mx6 buildable.
+         * Bechir contacted NXP and they will not be supporting Weston 6 for their i.Mx6 BSPs with the binary graphics driver.
+    * Renesas BSP updates
+      * 3.19 BSP for rocko will be released end of April (without KF)
+      * 3.19 BSP for thud will be released end of May (without KF).  Three weeks later for KF support. Makes 3.19 with KF a target for 8.0.1 because this will be in the RC4 timeframe.
+      * New graphics library will be middle of May. This will fix SPEC-2253.
+      * 6/4 - In-progress and on track.
+   * Sancloud should be pushing patches to master by the end of the week. Guppy and flounder already done.
+     * 4/30 - waiting for master. Still having issues. Guppy blew up over the weekend due to an internal server issue at Sancloud that has been resolved.
+     * 5/7 - Will look at 7.0.2 pre-release this week.
+     * 5/21 - Initial set of patches merged to master. Needs to debug some runtime issues. Weston 6.0 should be ok once we get TI sorted out.
+     * 5/28 - Nothing to report. Busy on other projects.
+     * 6/4 - Nothing to report.
+   * Change to not run as root will be tested in Jose's sandbox (sandbox/jobol/wip-mu)
+     * Stoyan and Edi reported a large number of problems. Will sync with Jose this week since he does not see the same issues. May be a problem with device tree name change for thud.
+     * 5/21 - No real progress. Jose is working with Edi and Stoyan.
+     * 5/28 - In progress. Jose hoping to have a proposal next week for sound and networking fixes.
+     * 6/4 - In progress. Jose working with Johann. Issues with gstreamer and lightmediascanner that need to be resolved. Plan is for RC2.
+   * GSOC - Cheryl Fong is our Google Summer of Code student this year. She will be working initially on a CAN simulator and then a smooth driving application.
+   * ALS integration plan
+     * Thierry and Naveen working on open source Alexa Voice Agent integration
+     * Will send build to Jan-Simon in next couple of weeks. Michael will integrate new microphone array at that time.
+     * Michael will send new microphone array to Soya-san. Integration in Japan planned for week of 24 June.
+   * George asked about SPEC-2473 and how to integrate Pipewire and which parts of 4a need to be left in. Disabling 4a results in Audio Manager and PulseAudio being brought in. Jan-Simon will work with George on getting the build options ready.
+New Business:
+------
+=== Meeting notes for June 4, 2019 ===
+Attendees: Walt, Jan-Simon, Scott. Thierry, Clement, Fred, Jose, Kurokawa, Yamaguchi, Tom, Pierre, Cheryl, Guy, Stoyan, Thomas W, Michael, Sebastien, Stephane, Armand, Jonathan, Bechir, Ronan, Raquel, Daniel, George, Haraki, Li
+   * Funky Flounder (flounder branch)
+     * Flounder 6.0.5 - [[agl-distro:release-notes#flounder_605|Release completed!]]
+   * Grumpy Guppy
+     * Guppy 7.0.0 - [[agl-distro:release-notes#grumpy_guppy_700|Release completed!]]
+     * Guppy 7.0.1 - [[agl-distro:release-notes#grumpy_guppy_701|Release completed!]]
+     * Guppy 7.0.2 -  [[agl-distro:release-notes#grumpy_guppy_702|Release completed!]]
+     * Guppy 7.0.3 - Release pushed back to June 30
+       * SPEC-2398 - Scott reported a regression in the IC map viewer (H/T to Witz for finding it) that is new to 7.0.2. Traced to the IVI side.
+       * SPEC-2393 - George seeing crash issue with Pipewire. Possible compiler bug? George tried compiling with Linaro compiler and it looked good.  Eric suggested changing optimization level, saw a similar thing. Investigate 32 bit vs. 64 bit build as a possibility. Konsulko will look at.
+           * Update 5/21 - Tom tested 6.0.5 and 7.0.0 RC1 is fine.  7.0.0 (and 7.0.2) was broken. All use the same version of pokey and meta-raspberrypi
+           * Update 5/28 - Tom waiting for George to test a few things to confirm that we are not confusing separate issue. Otherwise the non-pipewire apps are ok on guppy. George will move his development to master.
+           * Update 6/4 - George reports that the issue is still seen on master after he moved to master.
+       * Renesas <del>BSP 3.15 update pushed to for 7.0.2</del> (Ronan working on)
+         * 4/9 - Merged for master, waiting on guppy (SPEC-2185 and SPEC-2253)
+         * 4/23 - 7.0.2 will continue with BSP 3.9 while we wait for graphics fix. Possible update for 7.0.3.
+         * 5/14 - Stephane/Kurokawa-san - will not switch to 3.15 for guppy. Will wait for 3.19 which will be mid-June.
+         * 5/28 - Still waiting on Cogent layer for 3.19 for guppy.
+         * 6/4 - Still on hold waiting for Cogent.
+   * Happy Halibut - Pre-RC1 released today.
+     * RC1 will merge the Weston 6 sandbox, then test and build by the end of the week. Release is planned for 5/31.
+     * Stoyan reporting issue with mixing streams between local media and Bluetooth on M3.
+     * Once he switches to local media he loses BT for good on all boards.
+     * Bluetooth button is not active on any board.
+     * Weston 6.0 merged for RC1.
+     * SPEC-2468 - Issue reported with Gechic attached to M3.
+     * Daniel reported an issue with QEMU window manager startup that he is looking at.
+     * Re-enable i.MX6 builds
+       * Probably will not re-enable for SABRE auto in guppy, but will do so in Halibut
+       * 5/21 - Scott investigating using open source graphics.
+       * 5/28 - Looking at i.Mx6 and asked about kernel configuration options and what is needed to run app framework. We do not seem to have a standard set of config options.
+         * Is what Tom stated about a standard config file documented somewhere?  Scott will workout how to get the i.Mx6 kernel running and then update the documentation.
+       * 6/4 - Scott went down a rabbit hole and babbled about things for a few minutes... Will push changes to make the i.Mx6 buildable.
+         * Bechir contacted NXP and they will not be supporting Weston 6 for their i.Mx6 BSPs with the binary graphics driver.
+    * Renesas BSP updates
+      * 3.19 BSP for rocko will be released end of April (without KF)
+      * 3.19 BSP for thud will be released end of May (without KF).  Three weeks later for KF support. Makes 3.19 with KF a target for 8.0.1 because this will be in the RC4 timeframe.
+      * New graphics library will be middle of May. This will fix SPEC-2253.
+      * 6/4 - In-progress and on track.
+   * Sancloud should be pushing patches to master by the end of the week. Guppy and flounder already done.
+     * 4/30 - waiting for master. Still having issues. Guppy blew up over the weekend due to an internal server issue at Sancloud that has been resolved.
+     * 5/7 - Will look at 7.0.2 pre-release this week.
+     * 5/21 - Initial set of patches merged to master. Needs to debug some runtime issues. Weston 6.0 should be ok once we get TI sorted out.
+     * 5/28 - Nothing to report. Busy on other projects.
+     * 6/4 - Nothing to report.
+   * Change to not run as root will be tested in Jose's sandbox (sandbox/jobol/wip-mu)
+     * Stoyan and Edi reported a large number of problems. Will sync with Jose this week since he does not see the same issues. May be a problem with device tree name change for thud.
+     * 5/21 - No real progress. Jose is working with Edi and Stoyan.
+     * 5/28 - In progress. Jose hoping to have a proposal next week for sound and networking fixes.
+     * 6/4 - In progress. Jose working with Johann. Issues with gstreamer and lightmediascanner that need to be resolved. Plan is for RC2.
+   * GSOC - Cheryl Fong is our Google Summer of Code student this year. She will be working initially on a CAN simulator and then a smooth driving application.
+New business:
+   * Walt asked about holiday schedules in August. Weeks 33 and 34 are holiday weeks in Japan. Plan now is for Walt to be OOO weeks 33 - 35 and mostly off the grid (except for ELC in San Diego).
+   * ALS integration plan
+     * Thierry and Naveen working on open source Alexa Voice Agent integration
+     * Will send build to Jan-Simon in next couple of weeks. Michael will integrate new microphone array at that time.
+     * Michael will send new microphone array to Soya-san. Integration in Japan planned for week of 24 June.
+   * George asked about SPEC-2473 and how to integrate Pipewire and which parts of 4a need to be left in. Disabling 4a results in Audio Manager and PulseAudio being brought in. Jan-Simon will work with George on getting the build options ready.
+=== Meeting notes for May 28, 2019 ===
+Attendees: Walt, Jan-Simon, Scott, Jose, Eric, Kusakabe, Tom, Kurokawa, Armand, Bechir, Cheryl Fong, Chris, Clement, Fred, George, Johann, Jonathan, Li, Marc-Antoine, Paul, Pierre, Raquel, Salma, Stephane, Stoyan, Sebastienm Thierry, Thomas
+   * Gerrit /p fixed!
+   * Funky Flounder (flounder branch)
+     * Flounder 6.0.5 - [[agl-distro:release-notes#flounder_605|Release completed!]]
+   * Grumpy Guppy
+     * Guppy 7.0.0 - [[agl-distro:release-notes#grumpy_guppy_700|Release completed!]]
+     * Guppy 7.0.1 - [[agl-distro:release-notes#grumpy_guppy_701|Release completed!]]
+     * Guppy 7.0.2 -  [[agl-distro:release-notes#grumpy_guppy_702|Release completed!]]
+     * Guppy 7.0.3 - Release pushed back to June 30
+       * Fujitsu reported core dumps in HVAC and Dashboard on Raspberry Pi only for 7.0.0
+         * test reports: {{:eg-ciat:aglgg7_0_1regressiontestreport.zip|testreport xml zipped}}
+         * Issues with USB radio, BT, hvac and dashboard - **Now fixed in 7.0.2**
+         * 5/14 - SPEC-2393 - George seeing similar issue. Possible compiler bug? George tried compiling with Linaro compiler and it looked good.  Eric suggested changing optimization level, saw a similar thing. Investigate 32 bit vs. 64 bit build as a possibility. Konsulko will look at.
+           * Update 5/21 - Tom tested 6.0.5 and 7.0.0 RC1 is fine.  7.0.0 (and 7.0.2) was broken. All use the same version of pokey and meta-raspberrypi
+           * Update 5/28 - Tom waiting for George to test a few things to confirm that we are not confusing separate issue. Otherwise the non-pipewire apps are ok on guppy. George will move his development to master.
+       * Renesas <del>BSP 3.15 update pushed to for 7.0.2</del> (Ronan working on)
+         * 4/9 - Merged for master, waiting on guppy (SPEC-2185 and SPEC-2253)
+         * 4/23 - 7.0.2 will continue with BSP 3.9 while we wait for graphics fix. Possible update for 7.0.3.
+         * 5/14 - Stephane/Kurokawa-san - will not switch to 3.15 for guppy. Will wait for 3.19 which will be mid-June.
+         * 5/28 - Still waiting on Cogent layer for 3.19 for guppy.
+   * Happy Halibut
+     * RC1 will merge the Weston 6 sandbox, then test and build by the end of the week. Release is planned for 5/31.
+     * Re-enable i.MX6 builds
+       * Probably will not re-enable for SABRE auto in guppy, but will do so in Halibut
+       * 5/21 - Scott investigating using open source graphics.
+    * Renesas BSP updates
+      * 3.19 BSP for rocko will be released end of April (without KF)
+      * 3.19 BSP for thud will be released end of May (without KF).  Three weeks later for KF support. Makes 3.19 with KF a target for 8.0.1 because this will be in the RC4 timeframe.
+      * New graphics library will be middle of May. This will fix SPEC-2253.
+   * Sancloud should be pushing patches to master by the end of the week. Guppy and flounder already done.
+     * 4/30 - waiting for master. Still having issues. Guppy blew up over the weekend due to an internal server issue at Sancloud that has been resolved.
+     * 5/7 - Will look at 7.0.2 pre-release this week.
+     * 5/21 - Initial set of patches merged to master. Needs to debug some runtime issues. Weston 6.0 should be ok once we get TI sorted out.
+     * 5/28 - Nothing to report. Busy on other projects.
+   * Change to not run as root will be tested in Jose's sandbox (sandbox/jobol/wip-mu)
+     * Stoyan and Edi reported a large number of problems. Will sync with Jose this week since he does not see the same issues. May be a problem with device tree name change for thud.
+     * 5/21 - No real progress. Jose is working with Edi and Stoyan.
+     * 5/28 - In progress. Jose hoping to have a proposal next week for sound and networking fixes.
+   * Decided last week to upgrade Weston to 6.0 prior to RC1. Waiting for Daniel on that.
+     * Jan-Simon sent an email with a sandbox for testing (sandbox/jsmoeller/weston6). Scott will test the Intel build to make sure graphics are ok.
+     * 5/28 - Intel, QEMU, and M3 look ok.
+New business:
+   * Scott - Looking at i.Mx6 and asked about kernel configuration options and what is needed to run app framework. We do not seem to have a standard set of config options.
+     * Is what Tom stated about a standard config file documented somewhere?  Scott will workout how to get the i.Mx6 kernel running and then update the documentation.
+   * Cheryl Fong is our Google Summer of Code student this year. She will be working initially on a CAN simulator and then a smooth driving application.
+=== Meeting notes for May 21, 2019 ===
+Attendees: Walt, Jan-Simon, Armand, Aymeric, Ronan, Bogdan, Tom, Edi, Clement, Dennis, Fred, George, Johann, Jonathan, Leon, Marc-Antoice, Yamaguchi, Paul, Pierre, Raquel, Salma, Sebastien, Thierry, Thomas, Jose, Michael, Eric, Hosokawa
+   * Gerrit update over the weekend broke all of the builds. Master is now fixed. Earlier branches including guppy need a fix in the firewall or we will have to cut new releases to eliminate the "/p".  Looks like the firewall workaround is in place. Jan-Simon will test a full build today.
+   * Funky Flounder (flounder branch)
+     * Flounder 6.0.5 - [[agl-distro:release-notes#flounder_605|Release completed!]]
+   * Grumpy Guppy
+     * Guppy 7.0.0 - [[agl-distro:release-notes#grumpy_guppy_700|Release completed!]]
+     * Guppy 7.0.1 - [[agl-distro:release-notes#grumpy_guppy_701|Release completed!]]
+     * Guppy 7.0.2 - Pre-release sent out with Thierry's fix from last week for Bluetooth audio. Release On-hold pending the gerrit fix.
+       * Edi tested pre-release and Bluetooth is now fine.
+         * Audio popping issue (local media on Intel boards) as seen in 7.0.1.
+       * Fujitsu reported core dumps in HVAC and Dashboard on Raspberry Pi only for 7.0.0
+         * test reports: {{:eg-ciat:aglgg7_0_1regressiontestreport.zip|testreport xml zipped}}
+         * Issues with USB radio, BT, hvac and dashboard
+         * 5/14 - SPEC-2393 - George seeing similar issue. Possible compiler bug? George tried compiling with Linaro compiler and it looked good.  Eric suggested changing optimization level, saw a similar thing. Investigate 32 bit vs. 64 bit build as a possibility. Konsulko will look at.
+           * Update 5/21 - Tom tested 6.0.5 and 7.0.0 RC1 is fine.  7.0.0 (and 7.0.2) was broken. All use the same version of pokey and meta-raspberrypi
+       * Telematics reference device (demo image to be added to 7.0.2)
+         * https://git.automotivelinux.org/AGL/meta-agl-cluster-demo/tree/
+         * 4/16 - Should be ready to add to repos this week.
+         * 4/23 - Initial changes uploaded to master. Should get into 7.0.2.
+         * 4/30 - Ready. Just need Jira ticket in last commit from Scott. Jan-Simon will fix.
+         * 5/7 - Scott will test Telematics profile next week
+         * 5/14 - Scott will take a look this week.
+         * 5/21 - Scott tested master and guppy and they are fine, except we need to add gerrit 21336 to 7.0.2.
+     * Guppy 7.0.3 - Release planned for June 8
+       * Renesas <del>BSP 3.15 update pushed to for 7.0.2</del> (Ronan working on)
+         * 4/9 - Merged for master, waiting on guppy (SPEC-2185 and SPEC-2253)
+         * 4/23 - 7.0.2 will continue with BSP 3.9 while we wait for graphics fix. Possible update for 7.0.3.
+         * 5/14 - Stephane/Kurokawa-san - will not switch to 3.15 for guppy. Will wait for 3.19 which will be mid-June.
+   * Happy Halibut
+     * RC1 planned for May 10 - deadline for patches is May 3
+     * Re-enable i.MX6 builds
+       * Probably will not re-enable for SABRE auto in guppy, but will do so in Halibut
+       * 5/21 - Scott investigating using open source graphics.
+    * Renesas BSP updates
+      * 3.19 BSP for rocko will be released end of April (without KF)
+      * 3.19 BSP for thud will be released end of May (without KF).  Three weeks later for KF support. Makes 3.19 with KF a target for 8.0.1 because this will be in the RC4 timeframe.
+      * New graphics library will be middle of May. This will fix SPEC-2253.
+   * Sancloud should be pushing patches to master by the end of the week. Guppy and flounder already done.
+     * 4/30 - waiting for master. Still having issues. Guppy blew up over the weekend due to an internal server issue at Sancloud that has been resolved.
+     * 5/7 - Will look at 7.0.2 pre-release this week.
+     * 5/21 - Initial set of patches merged to master. Needs to debug some runtime issues. Weston 6.0 should be ok once we get TI sorted out.
+   * Change to not run as root will be tested in Jose's sandbox (sandbox/jobol/wip-mu)
+     * Stoyan and Edi reported a large number of problems. Will sync with Jose this week since he does not see the same issues. May be a problem with device tree name change for thud.
+     * 5/21 - No real progress. Jose is working with Edi and Stoyan.
+   * Decided last week to upgrade Weston to 6.0 prior to RC1. Waiting for Daniel on that.
+     * Jan-Simon sent an email with a sandbox for testing (sandbox/jsmoeller/weston6). Scott will test the Intel build to make sure graphics are ok.
+New business:
+   * Hosokawa-san wanted some more information on why we chose to upgrade to Weston 6.0 instead of 5.0 since it is supported by thud. ADIT will need to make some changes to Waltham transmitter for Weston 6.0.  Just to clarify Weston 6.0 for master and not for earlier branches and will not be used for ALS demo in July.
+   * George pushed sandbox for pipewire that used for demo in Japan in March. Hopes to have something people can use to start testing by next week.
+=== Meeting notes for May 14, 2019 ===
+Attendees: Walt, Jan-Simon, Tom, Michael, Chris, Paul, Dennis, Thierry, Stephane, Stoyan, Edi, Clemant, Marc-Antoine, Fred, Raquel, Jose, Pierre, George, Salma, Sebastien, Eric, Romain, Yamaguchi, Scott, Li
+   * Funky Flounder (flounder branch)
+     * Flounder 6.0.5 - [[agl-distro:release-notes#flounder_605|Release completed!]]
+   * Grumpy Guppy
+     * Guppy 7.0.0 - [[agl-distro:release-notes#grumpy_guppy_700|Release completed!]]
+     * Guppy 7.0.1 - [[agl-distro:release-notes#grumpy_guppy_701|Release completed!]]
+     * Guppy 7.0.2 - Pre-release sent out.
+       * Edi tested pre-release on Intel platform (Upsquare). Building M3 currently.
+         * Audio popping issue as seen in 7.0.1.
+         * SPEC-2387 - No audio over Bluetooth on any board. Thierry submitted gerrit 21296 and 21297 to fix.
+         * Audio from local media working on all platforms.
+       * Fujitsu reported core dumps in HVAC and Dashboard on Raspberry Pi only for 7.0.0
+         * test reports: {{:eg-ciat:aglgg7_0_1regressiontestreport.zip|testreport xml zipped}}
+         * Issues with USB radio, BT, hvac and dashboard
+         * 5/14 - SPEC-2393 - George seeing similar issue. Possible compiler bug? George tried compiling with Linaro compiler and it looked good.  Eric suggested changing optimization level, saw a similar thing. Investigate 32 bit vs. 64 bit build as a possibility. Konsulko will look at.
+       * Telematics reference device (demo image to be added to 7.0.2)
+         * https://git.automotivelinux.org/AGL/meta-agl-cluster-demo/tree/
+         * 4/16 - Should be ready to add to repos this week.
+         * 4/23 - Initial changes uploaded to master. Should get into 7.0.2.
+         * 4/30 - Ready. Just need Jira ticket in last commit from Scott. Jan-Simon will fix.
+         * 5/7 - Scott will test Telematics profile next week
+         * 5/14 - Scott will take a look this week.
+     * Guppy 7.0.3 - Release planned for June 8
+       * Renesas <del>BSP 3.15 update pushed to for 7.0.2</del> (Ronan working on)
+         * 4/9 - Merged for master, waiting on guppy (SPEC-2185 and SPEC-2253)
+         * 4/23 - 7.0.2 will continue with BSP 3.9 while we wait for graphics fix. Possible update for 7.0.3.
+         * 5/14 - Stephane/Kurokawa-san - will not switch to 3.15 for guppy. Will wait for 3.19 which will be mid-June.
+   * Happy Halibut
+     * RC1 planned for May 10 - deadline for patches is May 3
+     * Re-enable i.MX6 builds
+       * Probably will not re-enable for SABRE auto in guppy, but will do so in Halibut
+    * Renesas BSP updates
+      * 3.19 BSP for rocko will be released end of April (without KF)
+      * 3.19 BSP for thud will be released end of May (without KF).  Three weeks later for KF support. Makes 3.19 with KF a target for 8.0.1 because this will be in the RC4 timeframe.
+      * New graphics library will be middle of May. This will fix SPEC-2253.
+   * Sancloud should be pushing patches to master by the end of the week. Guppy and flounder already done.
+     * 4/30 - waiting for master. Still having issues. Guppy blew up over the weekend due to an internal server issue at Sancloud that has been resolved.
+     * 5/7 - Will look at 7.0.2 pre-release this week.
+   * Change to not run as root will be tested in Jose's sandbox (sandbox/jobol/wip-mu)
+     * Stoyan and Edi reported a large number of problems. Will sync with Jose this week since he does not see the same issues. May be a problem with device tree name change for thud.
+   * Decided last week to upgrade Weston to 6.0 prior to RC1. Waiting for Daniel on that.
+   * Paul reporting segfaults in one of the Qt rendering threads in Sancloud on master when running homescreen. Some concern from Paul about upgrade to Weston 6.0.
+     * Also will be moving the open source drivers to
+New business:
+   * Eric having issue with git fetches behind the Panasonic firewall. Will create a Jira ticket for Jan-Simon to review.
+   * Dennis asking about audio updates using Pipewire. [[https://confluence.automotivelinux.org/x/DICP | Notes from last week's meetings in Spain]].
 === Meeting notes for May 7, 2019 ===

Automotive Linux Wiki

User Tools

Site Tools

Differences

Page Tools