Differences

This shows you the differences between two versions of the page.

--- agl-distro:developer_resources [2016/01/05 11:20]
sdesneux [Generic build instructions]
+++ agl-distro:developer_resources [2017/01/06 20:46]
sdesneux
@@ Line 1: / Line 1: @@
+<WRAP center round alert 60%>
+**THIS PAGE IS OBSOLETE**
+Up to date content is now published on the developer web site:
+=> http://docs.automotivelinux.org/
+</WRAP>
 This page contains a list of developer resources.
 ====== AGL for Renesas Porter board ======
-===== Kickstart =====
+Up to date step by step instructions for [[start::building_for_the_renesas_r-car_m2|building AGL for Renesas Porter board are available here]].
+===== Automotive Grade Linux 2.0 =====
-This document explains step by step how to bootstrap a Porter board with AGL distribution and latest Renesas BSP then run a sample AGL application.
+The system DevKit allows developers to rebuild a complete bootable image from
+source code. It uses Yocto/Poky version 2.x with latest version of Renesas BSP
+and enables low-level development of drivers and system services as well as high level applications.
+The following documents/components are available:
+  * A quick guide: Kickstart on Renesas Porter boards
+  * A Docker container ready to build AGL distribution (Yocto 2.x), SDK and contains extra useful tools.
+  * A documentation guide on how to build from scratch an image and its SDK for Renesas Porter board
+  * A documentation guide on how to build AGL applications
+  * A documentation guide on how to bake a new low level system service
+==== Kickstart 2.0 ====
+This document explains step by step how to bootstrap a Porter board with AGL
+distribution and latest Renesas BSP then run a sample AGL application.
 The following topics are covered:
-  * instructions to build an embedded image of AGL 1.0 “Albacore” based on Yocto Project 1.7 and Renesas BSP (meta-renesas)
+  * instructions to build an embedded image of AGL 2.0 “Brillant Blowfish” based on Yocto Project 2.0 and Renesas BSP (meta-renesas)
   * instructions on how to install and boot the image on Porter board
   * instructions on how to add and run a “Hello World” application in the runtime system
@@ Line 14: / Line 37: @@
 [[http://iot.bzh/download/public/2016/sdk/AGL-Kickstart-on-Renesas-Porter-board.pdf|AGL-Kickstart-on-Renesas-Porter-board.pdf]]
-===== Prebuilt SDcard image =====
+==== Build BSP and SDK ====
+The AGL DevKit allows developers to rebuild a complete bootable image and its
+associated SDK from source code. It uses Yocto/Poky version 2.x with latest
+version of Renesas BSP and enables low-level development of drivers and
+system services. This guide describes how to create a Docker container able to
+build AGL images and associated SDKs. The container is also suitable to
+build AGL Applications independently of Yocto/Bitbake.
+[[http://iot.bzh/download/public/2016/sdk/AGL-Devkit-Image-and-SDK-for-porter.pdf|AGL-Devkit-Image-and-SDK-for-porter.pdf]]
+==== Build Applications ====
+This document describes the next step: using the SDK to build
+applications and deploy them on a target board running an AGL image.
+Application templates and demos allow developers to start
+developing various types of applications:
+  * Services
+  * Native applications
+  * HTML5 applications
+  * ...
+This guide focuses on how to use these applications templates.
+[[http://iot.bzh/download/public/2016/sdk/AGL-Devkit-Build-your-1st-AGL-Application.pdf|AGL-Devkit-Build-your-1st-AGL-Application.pdf]]
+Applications templates are available on Github: [[https://github.com/iotbzh/app-framework-templates]]
+==== Build low-level system service ====
+This document focuses on the procedure to add a new low level system service
+to the target firmware image. More specially, it highlights the integration of
+the system daemon named “hostapd” in the Yocto image built within the
+Devkit container
+[[http://iot.bzh/download/public/2016/bsp/AGL_Phase2-Devkit-HowTo_bake_a_service.pdf|AGL_Phase2-Devkit-HowTo_bake_a_service.pdf]]
+===== Automotive Grade Linux 1.0 =====
+==== Kickstart 1.0 ====
+This document explains step by step how to bootstrap a Porter board with AGL 1.0 distribution and latest Renesas BSP then run a sample AGL application.
+The following topics are covered:
+  * instructions to build an embedded image of AGL 1.0 “Albacore” based on Yocto Project 1.7 and Renesas BSP (meta-renesas)
+  * instructions on how to install and boot the image on Porter board
+  * instructions on how to add and run a “Hello World” application in the runtime system
+[[http://iot.bzh/download/public/2016/sdk/AGL-Kickstart-on-Renesas-Porter-board_1.0.pdf|AGL-Kickstart-on-Renesas-Porter-board_1.0.pdf]]
+==== Prebuilt AGL 1.0 SDcard image ====
 For convenience, the development images built in the previous document are made available at the
 following location: http://iot.bzh/download/public/2016/sdk/porter_images/ . They can be used as a starting point to boot the Porter board in development mode (see below SDK Kickstart).
-===== SDK Kickstart =====
+==== SDK 1.0 Kickstart ====
 This document explains step by step how to setup the development environment (SDK) for Porter board with AGL distribution and latest Renesas BSP.
@@ Line 37: / Line 108: @@
 ====== Generic build instructions ======
-The [[https://git.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=blob_plain;f=README.md;hb=HEAD|README.md]] file located in [[https://git.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=summary|meta-agl repository]] is updated regularly to reflect the latest changes in the distribution.
+The [[https://git.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=blob_plain;f=README-AGL.md;hb=HEAD|README-AGL.md]] file located in [[https://git.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=summary|meta-agl repository]] is updated regularly to reflect the latest changes in the distribution.
 Generic instructions are covered [[agl-distro:source-code|in this article]]

Automotive Linux Wiki

User Tools

Site Tools

Differences

Page Tools